woodro77 Posted February 8, 2006 Report Share Posted February 8, 2006 putting my project shee back together and it wont start. the motor was rebuilt , rode 1 day , the kid crashed broke his leg , it sat for a year , i bought ,took it apart painted and cleaned every thing and put it back together. tryed to start but wont.took carbs apart cleaned jets and every thing put back in but nothing .it has spark , if i put a little gas in spark holes it starts rite up , when i take the carbs apart the bowls are filled with fuel , i clean all jets and carbs ,blown out with compresser. help Quote Link to comment Share on other sites More sharing options...
kawiking Posted February 8, 2006 Report Share Posted February 8, 2006 im in the same boat! bought shee $500 ,cracked frame. repaired it, put it back together. now having trouble starting.wouldn't crank at all with air box lid off, now it's flooding it with gas. it will start for a second and then flood out. whatch my post maybe we can help each other on this .(maybe reeds) Quote Link to comment Share on other sites More sharing options...
woodro77 Posted February 8, 2006 Author Report Share Posted February 8, 2006 i checked reeds look fine Quote Link to comment Share on other sites More sharing options...
suzuki0702 Posted February 8, 2006 Report Share Posted February 8, 2006 make sure slides are in correct....taper towards airbox Quote Link to comment Share on other sites More sharing options...
FIRST BANSHEE Posted February 8, 2006 Report Share Posted February 8, 2006 putting my project shee back together and it wont start. the motor was rebuilt , rode 1 day , the kid crashed broke his leg , it sat for a year , i bought ,took it apart painted and cleaned every thing and put it back together. tryed to start but wont.took carbs apart cleaned jets and every thing put back in but nothing .it has spark , if i put a little gas in spark holes it starts rite up , when i take the carbs apart the bowls are filled with fuel , i clean all jets and carbs ,blown out with compresser. help 470508[/snapback] If it starts when you put gas in the cylinders,and you have gas in the bowls. I would say your problem is the carbs. there pluged not letting the gas get to the engine. Quote Link to comment Share on other sites More sharing options...
woodro77 Posted February 8, 2006 Author Report Share Posted February 8, 2006 If it starts when you put gas in the cylinders,and you have gas in the bowls. I would say your problem is the carbs. there pluged not letting the gas get to the engine. 470565[/snapback] cleaned the carb all the jets when i blow out with air compresser ever thing is clean and working Quote Link to comment Share on other sites More sharing options...
banshee tuner Posted February 8, 2006 Report Share Posted February 8, 2006 Pull it in gear and start it, I let mine sit for 3 months once and that was the only way to crank it. After that it cranked every time. Quote Link to comment Share on other sites More sharing options...
Wallrat Posted February 8, 2006 Report Share Posted February 8, 2006 What's your jetting? Mods? Elevation? Temperature? Quote Link to comment Share on other sites More sharing options...
FIRST BANSHEE Posted February 8, 2006 Report Share Posted February 8, 2006 cleaned the carb all the jets when i blow out with air compresser ever thing is clean and working 470612[/snapback] when you put gas in the cylinders and start it does it stay running? Quote Link to comment Share on other sites More sharing options...
MILO Posted February 8, 2006 Report Share Posted February 8, 2006 make sure the crossover tube is in place and that you don't have the carb bowls swithed. the bowl with the 'starter jet' has to be on the left side. Quote Link to comment Share on other sites More sharing options...
woodro77 Posted February 9, 2006 Author Report Share Posted February 9, 2006 mods are just a pipe , dont know jetting think 240 main. live in ny sea level , as i said quad ran fine until crashed and sat for year, in the crash all that was broken was key switch and ground wire . top end has 1 ride on it, when i put gas strait into cylinders it starts for a second or two ,till it burns up i guess . cant figure it out , please help want to ride Quote Link to comment Share on other sites More sharing options...
Brian060 Posted February 9, 2006 Report Share Posted February 9, 2006 Do you live on long island? Quote Link to comment Share on other sites More sharing options...
FIRST BANSHEE Posted February 9, 2006 Report Share Posted February 9, 2006 mods are just a pipe , dont know jetting think 240 main. live in ny sea level , as i said quad ran fine until crashed and sat for year, in the crash all that was broken was key switch and ground wire . top end has 1 ride on it, when i put gas strait into cylinders it starts for a second or two ,till it burns up i guess . cant figure it out , please help want to ride 470863[/snapback] I still say your carbs are the problem, if they have gas in the bowls and it won't stay running after you put gas in the cylinders except for 2 seconds, the passages are plugged, or you have a big ass air leak.whats your compression, no compression, no vacuum, won't pull any fuel? Quote Link to comment Share on other sites More sharing options...
woodro77 Posted February 9, 2006 Author Report Share Posted February 9, 2006 Do you live on long island? 470903[/snapback] yes i live on long island Quote Link to comment Share on other sites More sharing options...
woodro77 Posted February 9, 2006 Author Report Share Posted February 9, 2006 I still say your carbs are the problem, if they have gas in the bowls and it won't stay running after you put gas in the cylinders except for 2 seconds, the passages are plugged, or you have a big ass air leak.whats your compression, no compression, no vacuum, won't pull any fuel? 470904[/snapback] compression good it brand new top end Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.