hillbillybanshee Posted January 22, 2006 Report Share Posted January 22, 2006 58x68 cub with 35 pwks and cpis need a starting point for jetting?? Quote Link to comment Share on other sites More sharing options...
blueshee03 Posted January 22, 2006 Report Share Posted January 22, 2006 48 pilots and 160 mains Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted January 22, 2006 Report Share Posted January 22, 2006 Should try and always ask your builder or who you purchased them from. I know we give tips when we sell a CUB kit ! ALot is going to depend on what needle you have and your elevation etc. I would say starting point around 165-168 , needle in the middle , and maybe 50 pilot ?!! The needle can make all the difference though. Hope that helps some. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted January 22, 2006 Report Share Posted January 22, 2006 whats ur elevation? at 1000 feet here in missouri i run 162 main and 45 pilot. CEL needle if i remember right... Quote Link to comment Share on other sites More sharing options...
RNBRAD Posted January 22, 2006 Report Share Posted January 22, 2006 Currently running 160 main and 55 pilot CEL needle mid clip. Quote Link to comment Share on other sites More sharing options...
rocketboy Posted January 22, 2006 Report Share Posted January 22, 2006 i run 155 mains with 52 pilots and dek needles on my 65mm cub no ones gonna be able to jet the thing spot on over the net without being there,do enough reaserch on it and youll se most people run a pilot around 50-55ish and mains around 155-162 with cel needles or dek needles Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.