sanddragger28 Posted January 15, 2006 Report Share Posted January 15, 2006 Well where can I start I have a really nice bike and am not sure if I should sale it or not to buy a full drag bike or hill shooter I will list mods bike is very clean and is in the process of being put back together it hasnt even been ridden its practically brand new not a scratch on it motor has 3 hours total on it I framed it off for the second time lol because I wanted to change the colors on it from candy red to candy black lol Iam an idiot I got about 15k in this bike and havent even ridden since frame off. ok here it go's 2004 Banshee Frame = Powdercoated candy jet black Plastic=Custom painted black with silver marble flames with perfect looking cut Aarms all of them=Chrome spindles=Chrome both Hubs=chrome with powdercoated black insert tierods=Chrome both Steering stem=Chrome Handle bars=Chrome with powder coated middle bar blk swingarm 8 over=Chrome Axle=Chrome Carrier=Chrome with black powder coat Shocks=stk front Rear=Marvin Shaw with custom powder coat and full polish Shock holder mount=Chrome with powder coated insert upper and lower brake levers master cylinders thumb throttle polished and chromed wheels tires hole shots 4 itp polished wheels 90% tread left frame has also been shaved and lightened Pegs=Chrome with blk pwder inserts All nuts bolts and washers have been chromed Motor Crank trued welded Cylinders Stage IV trinity drag port Head Stage IV 17cc domes full polished reeds Vforce2 reeds timming plate trinity lightened fly wheel Brand new parts not installed yet because putting back together still almost completed New=Trinity stage Iv Chrome out of frame drag pipes with silencer New=35mm pwk Trinity New=Trinity polished intake manifolds New=terry cable Thumb throttle New=terry cable stailess steel braided throttle New=terry cable stainless steel braided clutch cable New=terry cable stainless steel braided brake cable New=Chrome clutch cover New=Polished water pump cover with clutch cover insert flames polished New=K&N Trinity outwears My loss could be your gain 7800.00 firm takes her home Thanks Christian Quote Link to comment Share on other sites More sharing options...
cjm02ram Posted January 15, 2006 Report Share Posted January 15, 2006 Good luck on getting anything close to that amount Quote Link to comment Share on other sites More sharing options...
rocketboy Posted January 15, 2006 Report Share Posted January 15, 2006 My loss could be your gain 7800.00 firm takes her home Thanks Christian 459849[/snapback] ...or your gain could be someones loss $7,800.00 firm is beyond high ,though it sounds like a very nice ride Quote Link to comment Share on other sites More sharing options...
sanddragger28 Posted January 15, 2006 Author Report Share Posted January 15, 2006 ...or your gain could be someones loss $7,800.00 firm is beyond high ,though it sounds like a very nice ride 459853[/snapback] Beyond high you guys must have never built a real bike before.Its an 04 6k just for the bike do the math bike 6k plastics to get custom done say 1kto chrome and powdercoating 3k wheel/tires 600 swinger 600 pipes 650 head 300 porting 500 carbs intakes 650 thumb throttle with all cables 230 crank mods 100 plus billett pieces 500 plus other misc parts that i have not listed as far as small mods etc and labor everyone misses a lot of stuff . bikes look nice until you get down to all the small detail stuff that everyone misses so you tell me how a bike with out a scratch on it and has 3 hours on the motor that is completley done for 7800 is to much it is brand new still if you were building one you would spend twice the amount of money.is it to much because it does have a set of 900.00 cubs on it Quote Link to comment Share on other sites More sharing options...
helldriver Posted January 15, 2006 Report Share Posted January 15, 2006 not for nothing, but putting money into a banshee is NOT an investment, you wont get thjat much,,,, you will be lucky to get 4,500 for it Quote Link to comment Share on other sites More sharing options...
CHAINSAW Posted January 15, 2006 Report Share Posted January 15, 2006 You would have better luck trying to part it out and reach what your wanting, then selling it whole. Quote Link to comment Share on other sites More sharing options...
4everwantedbanshee Posted January 16, 2006 Report Share Posted January 16, 2006 put it on ebay i seen a couple of banshee like your go for 10k. Quote Link to comment Share on other sites More sharing options...
sanddragger28 Posted January 16, 2006 Author Report Share Posted January 16, 2006 well if anyone has got one as new and almost as nice ill buy for 4500 Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 16, 2006 Report Share Posted January 16, 2006 $7800?? What is with people trying to sell these things for so much lately? Like the idiot on ebay. You will never get that much for it, not matter how much crap you have chromed and bling'd out. Quote Link to comment Share on other sites More sharing options...
sanddragger28 Posted January 16, 2006 Author Report Share Posted January 16, 2006 well if anyone has got one as new and almost as nice ill buy for 4500 460004[/snapback] Do you realize how much of an idiot you sound like first of all a clean 04 can bring 4000-4500 with pipes. this is not your terd 10 year old banshee that is on 80 bore and needs to be trashed because you could never afford to get a real bike and build a real one people sale there motors every day that are are nice built cheetahs or cubs for 4-7 k depending on what it is.why dont you go to planetsand and look at some real bikes and see what they are bringing before you run your mouth like a kid. Quote Link to comment Share on other sites More sharing options...
4everwantedbanshee Posted January 16, 2006 Report Share Posted January 16, 2006 i do think it is alot. but i am just saying what i saw on ebay. i personley wouldnt spend more then 2k on buying a banshee. like helldriver said banshees are not a good investment. Quote Link to comment Share on other sites More sharing options...
rocketboy Posted January 16, 2006 Report Share Posted January 16, 2006 bike 6k plastics to get custom done say 1kto chrome and powdercoating 3k wheel/tires 600 swinger 600 pipes 650 head 300 porting 500 carbs intakes 650 thumb throttle with all cables 230 crank mods 100 plus billett pieces 500 459873[/snapback] plastic 1000? chrome powdercoar3000? swinger600? porting 500 dollars ? wheels ansd tires 600? pipes 650 ? carbs 650? im calling the bullshit police cause thats all double what it should cost ,where the hell are you buying all this shit from,people in other countrys dont even pay that much for mods Quote Link to comment Share on other sites More sharing options...
sanddragger28 Posted January 16, 2006 Author Report Share Posted January 16, 2006 Thats your black bike in the avatar thats a terd and your trying to tell me what my bikes worth lol your not even in the same ball park I wouldnt even put your peg bolts on my bike Quote Link to comment Share on other sites More sharing options...
GYTWYPT Posted January 16, 2006 Report Share Posted January 16, 2006 guess he hasnt noticed the decline in banshee prices lately. Big deal its an 04 mine is a 94 and it is the same damn thing sice I switched to the late model wiring. Oh wait now I see its all that over priced TRINITY crap. good luck though. If you find someone to buy it let me know i would like to sell a couple to the same guy. Quote Link to comment Share on other sites More sharing options...
sanddragger28 Posted January 16, 2006 Author Report Share Posted January 16, 2006 plastic 1000?chrome powdercoar3000? swinger600? porting 500 dollars ? wheels ansd tires 600? pipes 650 ? carbs 650? im calling the bullshit police cause thats all double what it should cost ,where the hell are you buying all this shit from,people in other countrys dont even pay that much for mods 460047[/snapback] why dont you call H&S customs and get a price on paint theres earl scheib and then theres ferrari I prefer ferrari call and get a price Chrome go price triple plated chroming and powder coating its not the powder coat thats so expensive it all the small detail taping on specific parts to make it look right Pipes porting wheels and tires=Go to trinityracing.com and price this stuff along with the carbs and intakes at trinity. Obviously you dont know what your talking about because anyone who has built one knows is there anyone on here who has built a real bike that knows whats up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.