8buck Posted January 6, 2006 Report Share Posted January 6, 2006 I run smoothies and can't decide if higher pressure (less drag?) or lower pressure (better floatation?) would be best on the sand. Any ideas??? Quote Link to comment Share on other sites More sharing options...
Bansh88 Posted January 6, 2006 Report Share Posted January 6, 2006 I run 8lbs in my Razorbacks. Kinda middle of the road I think Quote Link to comment Share on other sites More sharing options...
Wallrat Posted January 6, 2006 Report Share Posted January 6, 2006 I run 5lbs all around on my sandstars. Good float but okay for some jumping too. Quote Link to comment Share on other sites More sharing options...
Cooker Posted January 20, 2006 Report Share Posted January 20, 2006 4psi, I hate having my fronts dig into the soft stuff. They're Mohawks. Quote Link to comment Share on other sites More sharing options...
banshee tuner Posted January 20, 2006 Report Share Posted January 20, 2006 Run 4 psi for the float in soft sand, higher is good for hard pack surfaces. Quote Link to comment Share on other sites More sharing options...
ellison445 Posted January 20, 2006 Report Share Posted January 20, 2006 I run 5 all around normal ridding..... 3 in the rears for wheelieing Quote Link to comment Share on other sites More sharing options...
harpc88 Posted March 31, 2006 Report Share Posted March 31, 2006 7 or 8 psi, in front Razorbacks 3 or 4 psi, in rear Haulers I blow the beads off if run front tires lower than 5 when jumping Set it up according to feel, what your comfortable with Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted March 31, 2006 Report Share Posted March 31, 2006 5psi in the fronts, and depending on sand conditions I've ran anywhere from 2psi to 8psi in the rear . Quote Link to comment Share on other sites More sharing options...
theeechozen1 Posted March 31, 2006 Report Share Posted March 31, 2006 4 in front, 6 rear sandstars, I like the rears a little stiff so I can slide across the sand easier Quote Link to comment Share on other sites More sharing options...
RIPPEN Posted June 3, 2006 Report Share Posted June 3, 2006 Iam curious what to run my Dune trackers at??? I run 4-5psi on my haulers in the rear and that feels good but the front tires Iam not so sure about.. RIPPEN Quote Link to comment Share on other sites More sharing options...
Wallrat Posted June 13, 2006 Report Share Posted June 13, 2006 As a rule of thumb, just start w/ 5psi and adjust from there. 5psi is enough to give you good float, a softer ride, and you won't blow the beads off by jumping. If the sand is wet you can put in a couple more psi but I usually don't bother. If you don't jump you can drop 1-2 psi. Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted June 13, 2006 Report Share Posted June 13, 2006 I run 5 all the way around for mine............. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.