superdave Posted December 30, 2005 Report Share Posted December 30, 2005 (edited) Just got a phone call stating that my top end is being shipped back to me. Jeff had it done in four weeks and this included the holidays.....can not say more about this guys customer service and ability to get the job done as discribed and on a budget...Great job Jeff and thanks......D I will give a post when I get it together and running... Edited December 30, 2005 by superdave Quote Link to comment Share on other sites More sharing options...
RIPPEN Posted December 30, 2005 Report Share Posted December 30, 2005 Good, sounds like he is definatly consistant. Cant wait till I get my speciall phone call RIPPEN Quote Link to comment Share on other sites More sharing options...
superdave Posted December 30, 2005 Author Report Share Posted December 30, 2005 Yes it is nice to get "the call"....can not wait to get it running..might be a little bit due to it being really cold in Colorado...Trying to make a trip to Glamis in the end of Jan. if that happens I will have a ride report soon...D Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 30, 2005 Report Share Posted December 30, 2005 let us know how it runs! im sure itll haul some ass... Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted December 30, 2005 Report Share Posted December 30, 2005 that asshole jim at passion only had my motor 8 days.......a fucking month to do 3 hours work aint bad i guess Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 30, 2005 Report Share Posted December 30, 2005 that asshole jim at passion only had my motor 8 days.......a fucking month to do 3 hours work aint bad i guess 453481[/snapback] quality over quantity is a better saying in my book! also goes to show you who is a more popular builder if hes got a wait time like that??? Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted December 30, 2005 Report Share Posted December 30, 2005 quality over quantity is a better saying in my book! also goes to show you who is a more popular builder if hes got a wait time like that??? 453492[/snapback] if i recall i told jim to build my motor yesterday and send me the bill, not hey i sraped up 375 bucks and i want ya to hack at my cylinders for me, if one of these guys spends more than four hours grinding at your shit ill kiss yer ass, if you think any one of these guys are nursing your jugs for 2 weeks with a grinder for your 4-500 bucks your high, just maybe this other guy beats dick alot and lets shit that comes in sit for 29 days and then does it and sends it out, lets not go suckin this guys cock just yet, i wanna see one of his bikes win a race, maybe place in something ill hear about, maybe the grand nationals like proquad does on that shitty passion motor Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 30, 2005 Report Share Posted December 30, 2005 if i recall i told jim to build my motor yesterday and send me the bill, not hey i sraped up 375 bucks and i want ya to hack at my cylinders for me, if one of these guys spends more than four hours grinding at your shit ill kiss yer ass, if you think any one of these guys are nursing your jugs for 2 weeks with a grinder for your 4-500 bucks your high, just maybe this other guy beats dick alot and lets shit that comes in sit for 29 days and then does it and sends it out, lets not go suckin this guys cock just yet, i wanna see one of his bikes win a race, maybe place in something ill hear about, maybe the grand nationals like proquad does on that shitty passion motor 453499[/snapback] FAST motors have won plenty around here. he had a pretty big writeup in some sand sports magazine when some guys with his motors won some races at LS...ive never heard of this grand national thing, but then again i dont follow up on passion's motors either.. oh and when i talked to jeff the other day, he said he had 25 motors from guys just on HQ..and he also named some off PS..im guessin he has maybe 35 motors at his shop right now? even at 4 hours a motor, you are lookin at possibly 3 weeks. hes got a pretty busy parts business going on as well. he told me hes been goin out after dinner and getting porting done when the phone is not ringin off the hook..apparantly hes doing something right Quote Link to comment Share on other sites More sharing options...
THEREALBUDLIGHTBANSHEE Posted December 30, 2005 Report Share Posted December 30, 2005 jeff@fast is the only person i'll deal w/from here on out,super guy. OH and blue dushe,what cat shit in your mouth this morning? Quote Link to comment Share on other sites More sharing options...
blueshee03 Posted December 30, 2005 Report Share Posted December 30, 2005 why is it that jim and passion motors are the only motors you guys bad mouth.is it because you guys hate the real competition that much?is it because its the only other builder and motor you guys are familiar with?maybe its because jeff gives you guys great discounts to do it.maybe ...well i goin there.i bet if all you guys that swear by jeffs motors actually ran or even seen some of the other builders motors run ,50 percent of ya's would either sell ur fast motor and get one from one of the other builders or kick yourself in the ass for not lookin at some of the others.hows come you guys don't cut on a&s or grr's motors or ssr motors or rdz or wicked or port magic or whats that other guy down there ?rick cairo or something like that.how does fasts motors run compared to a motor ported by him? Quote Link to comment Share on other sites More sharing options...
FasterThanU90 Posted December 31, 2005 Report Share Posted December 31, 2005 Cant wait to get my 4mm cub back from Jeff and as far as jim goes i talked to him and he was a nice guy helped me out with getting a setup but i called jeff and decided to go with him Thanksalot Jeff and never did get ahold of those Patriot guys Quote Link to comment Share on other sites More sharing options...
23champ Posted December 31, 2005 Report Share Posted December 31, 2005 Accually Jeff and Rick are pretty good friends from what I understand. I think they both kinda showed each other some differnt ideas and tricks of the trade over the years. I dont know of Jeffs times, but I do know that Rick has built a 350 (OEM) that has run 3.90 in 300ft. Not tryin to get in the middle of anything here..just tellin what I know. Carry on Quote Link to comment Share on other sites More sharing options...
RIPPEN Posted December 31, 2005 Report Share Posted December 31, 2005 why is it that jim and passion motors are the only motors you guys bad mouth.is it because you guys hate the real competition that much?is it because its the only other builder and motor you guys are familiar with?maybe its because jeff gives you guys great discounts to do it.maybe ...well i goin there.i bet if all you guys that swear by jeffs motors actually ran or even seen some of the other builders motors run ,50 percent of ya's would either sell ur fast motor and get one from one of the other builders or kick yourself in the ass for not lookin at some of the others.hows come you guys don't cut on a&s or grr's motors or ssr motors or rdz or wicked or port magic or whats that other guy down there ?rick cairo or something like that.how does fasts motors run compared to a motor ported by him? 453521[/snapback] Funny.... I could possibly be wrong but I can't remember the last time I saw one of Jeffs customers going out of their way just to talk shit on Jim like you all say. Its some of Jims guys that get all ass hurt and take everything personal when Jeff is mentioned. And to say that Jeff is giving a discount to his customers to talk shit.... You obviously don't know your dick from your neighbors leaf rake. I actually remember Jeff saying that Jim from passion does great work also. To be totaly truthfull I have never heard Jeff bad mouth anyone, he has always been friendly and very business like. Iam sure Jims work is great but his work isn't for everyone just as Jeffs may not be for others. But don't personaly talk shit on Jeff when he has done his best to treat everyone fairly. This is the third thread where this has been a shit storm because some of you loyal Passion guys get all personal and childish. Your loyal to your builder, your happy with his service, your happy about how your bike runs? Great, then tell the world how happy you are that your bikes rip. But quit sounding like bitchs-- "Your hills are little hills"," my top end got done before your top end". It just sounds petty and all that is gonna do is hurt your credibility, not sway others... RIPPEN Quote Link to comment Share on other sites More sharing options...
blueshee03 Posted December 31, 2005 Report Share Posted December 31, 2005 Funny.... I could possibly be wrong but I can't remember the last time I saw one of Jeffs customers going out of their way just to talk shit on Jim like you all say. Its some of Jims guys that get all ass hurt and take everything personal when Jeff is mentioned. And to say that Jeff is giving a discount to his customers to talk shit.... You obviously don't know your dick from your neighbors leaf rake. I actually remember Jeff saying that Jim from passion does great work also. To be totaly truthfull I have never heard Jeff bad mouth anyone, he has always been friendly and very business like. Iam sure Jims work is great but his work isn't for everyone just as Jeffs may not be for others. But don't personaly talk shit on Jeff when he has done his best to treat everyone fairly. This is the third thread where this has been a shit storm because some of you loyal Passion guys get all personal and childish. Your loyal to your builder, your happy with his service, your happy about how your bike runs? Great, then tell the world how happy you are that your bikes rip. But quit sounding like bitchs-- "Your hills are little hills"," my top end got done before your top end". It just sounds petty and all that is gonna do is hurt your credibility, not sway others... RIPPEN 453551[/snapback] oh that really answered my question.i'm sure jeff builds an ok motor but i still want to know why passion is the only builder that is cut down and called names .can't a post be made about fast without the crew cutting down passion . Quote Link to comment Share on other sites More sharing options...
jeepman380 Posted December 31, 2005 Report Share Posted December 31, 2005 You guys know Rick Cairo? I have seen one of his banshees and it was badass. For the ones that are talking shit on Jeff...Have you ever delt with him? He's the nicest guy I know. Best customer service that I've ever experienced. I live like 20 minutes away from his shop and I go there whenever I can just to bullshit with him and get a set of 4mm cubs. He don't mind if you stop by to talk to him either..he'll talk your ear off. So for those who are saying shit about him and his work don't say shit about him till you have delt with him. Oh yeah he didn't bribe me either to say this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.