aguita Posted September 12, 2005 Report Share Posted September 12, 2005 today i went to ride my shee and i filled up the tank full of gas and started my riding..after couple of mnis riding 1 cylinder stoped working and it lost the power after that it bogged then the other cilnder were misfiring then it dies!! i checked the plug filter everything and they are ok!i tried to kick the engine lot of time and no luck..past week i installed the ricky stator timming plate and when i kicked the engine today after the problem the flywheel sound that is like looisse or something..can a loose flywheel can cause this problem of not starting and sounding like is somethinh loose on the flywheel side?? when i put the timming plate i forgot to put some loctite on the flywheel nut mayb it came loose..cuz after i installed the timming plate the engine ripped alot!! please help!! Quote Link to comment Share on other sites More sharing options...
chris642 Posted September 12, 2005 Report Share Posted September 12, 2005 turn your tank on reserve or fill it up with gas, sounds like your running low thats what my banshee does when its time to switch her to reserve. Quote Link to comment Share on other sites More sharing options...
iceman Posted September 12, 2005 Report Share Posted September 12, 2005 yeah. check your gas. i dont understand how even when there is a little bit of gas left in the tank it dies. i would think it would run fine until ALL the gas was gone. i actually coasted back to my truck one time. got really lucky. wouldve been a sucky push. check your compression too. Quote Link to comment Share on other sites More sharing options...
aguita Posted September 12, 2005 Author Report Share Posted September 12, 2005 the tank is FULL! i mean Full!!! u can touch the gas with ur middle finger!! and when u kick it the flywheel sounds like is loose or somehting..anywayz i wll dissamble tommorow any other input?? Quote Link to comment Share on other sites More sharing options...
iceman Posted September 12, 2005 Report Share Posted September 12, 2005 .....tighten your flywheel. Quote Link to comment Share on other sites More sharing options...
reded Posted September 12, 2005 Report Share Posted September 12, 2005 Sounds like your nut on flywheel came loose. Quote Link to comment Share on other sites More sharing options...
aguita Posted September 12, 2005 Author Report Share Posted September 12, 2005 fixed,flywheel was loose..thanks guyz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.