Killdmycobra Posted August 31, 2005 Report Share Posted August 31, 2005 I decided to go ahead and build a stroker instead of keeping the motor stock. I am goign to be running rocket pipes with this setup. It will be a stock cylinder with 4mm long rod stroker crank. About how much will it cost for a good port job and assembly of the new crank and pistons??? I have a guy down here, but i would rather have someone with experience with stroker and rocket pipe banshees. Jeff BTW, what are the best internals for my motor? Quote Link to comment Share on other sites More sharing options...
Big Blue Posted August 31, 2005 Report Share Posted August 31, 2005 Weisco crank and pistons for internals, tear down and assembly is usually around 200-250, + whatever other things you need or have done. Quote Link to comment Share on other sites More sharing options...
bigboybanshee Posted August 31, 2005 Report Share Posted August 31, 2005 Agreed^^^^^^ Depending on what kind of portwork you want, expect to pay between 250 and 500 bucks, and that does not include the cost of pistons. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted September 1, 2005 Report Share Posted September 1, 2005 prolly 300 to 500 for porting and a crank runs about 475 brand new. give Jeff @ FAST racing a call and see what he can do for you. he builds some real fast shit.. 1-785-364-5325 Quote Link to comment Share on other sites More sharing options...
Malott 1 Posted September 3, 2005 Report Share Posted September 3, 2005 Sell your stock cylinders probably get around 200-300 out of them maybe more take the 500 you would pay for porting anyway put it together and by some cubs from Fastoys on here and you will be alot happier than just porting your stock cylinders. Quote Link to comment Share on other sites More sharing options...
brugal Posted September 3, 2005 Report Share Posted September 3, 2005 $500.00 ,and if you get some change back ,you did good... Quote Link to comment Share on other sites More sharing options...
rocketboy Posted September 3, 2005 Report Share Posted September 3, 2005 a h129 banshee stroker crank can be purchased for 429$ off the net fro m several places porting is gonna run 400-500$ then theres stil lalot more to buy my friend .for the 4 mill stroker idea on a banshee ,you might as wel l just sell the stock jugs and run a cub mono IMO with cut domes and a some 35pwks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.