Otis Posted August 9, 2005 Report Share Posted August 9, 2005 (edited) i removed the gear from the stock cluth basket, and didnt realize there was a washer between the two(it fell off when i took the gear off the basket.... which way does this washer sit on the gear? Does the outer diameter face up, like in the first picture(on the left) or face down towards the gear, like in the picture on the right? Edited August 9, 2005 by Otis Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted August 9, 2005 Report Share Posted August 9, 2005 Otis , it goes like the first picture! Up.. Look at the wear pattern on old metal cover plate , that might help too. If you need any help call me! Quote Link to comment Share on other sites More sharing options...
Otis Posted August 10, 2005 Author Report Share Posted August 10, 2005 thanks Jeff... I didn't wanna call for something little like this....Your busy enough as it is... thanks again.. oh and by the way, i got the clutch basket....she's almost too purdy to hide behind the clutch cover.. Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted August 10, 2005 Report Share Posted August 10, 2005 thanks Jeff... I didn't wanna call for something little like this....Your busy enough as it is... thanks again.. oh and by the way, i got the clutch basket....she's almost too purdy to hide behind the clutch cover.. 402996[/snapback] Call anytime man , thats the service Rocky mountain cant touch !!! lol Quote Link to comment Share on other sites More sharing options...
MILO Posted August 10, 2005 Report Share Posted August 10, 2005 what difference will it make if you have it in backwards?? the same thing happened to me when i had it apart. honestly, i don't remember which way i put it in, it's been a few months. i guess if it was wrong and could be a big issue it would have come about by now. Quote Link to comment Share on other sites More sharing options...
Otis Posted August 11, 2005 Author Report Share Posted August 11, 2005 what difference will it make if you have it in backwards?? the same thing happened to me when i had it apart. honestly, i don't remember which way i put it in, it's been a few months. i guess if it was wrong and could be a big issue it would have come about by now. good question... I'm thinkin that it might not let the back plate seat properly if not put in right, but.... hey are there torque specs on back plate screws?? There's nothing in the directions about it, but i thought i'd ask anyway...just in case... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.