kcraptor Posted August 3, 2005 Report Share Posted August 3, 2005 I just bought some 28 's I was just wondering how do you choke it when both carbs have a choke on them.I've never had the stock carbs off the bike, it has a pipe on it but was installed and jetted by prev. owner, I was just wondering before I tear into it.Also where should I start on jetting, needle position, pilots, and air screws, the 28's have 140 mains in them. I live in Kansas I think I'm around a 1000ft. above sea level mods DMC pipe mods I will do when I install my carbs cool head V-force reeds pod filters 28 PWK's timing plate Where is a good place to purchase jets for the 28's Quote Link to comment Share on other sites More sharing options...
BansheeBrian Posted August 3, 2005 Report Share Posted August 3, 2005 When your on you're shee just stand up on the pegs reach back ,unlatch the seat and pull it back far enough so you can get at the chokes.You don't have to take the seat completely off every time to fire it up. Quote Link to comment Share on other sites More sharing options...
odaen Posted August 3, 2005 Report Share Posted August 3, 2005 my 97 had 35pwk's and I'd just choke the left carb and the bike would start fine Quote Link to comment Share on other sites More sharing options...
RNBRAD Posted August 3, 2005 Report Share Posted August 3, 2005 my 97 had 35pwk's and I'd just choke the left carb and the bike would start fine 400503[/snapback] Same here! Quote Link to comment Share on other sites More sharing options...
Big Blue Posted August 3, 2005 Report Share Posted August 3, 2005 Same here also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.