quad4me Posted July 20, 2005 Report Share Posted July 20, 2005 I got some shit to repack a silencer....but cannot get it apart. It is a DYNOPORT 2 into 1 pipe....the silencer has 3 screws at the "base" end of it and 3 rivets at the "tip." I took out the 3 screws and could only get it to rotate around....would NOT pull off. Anyone have some helping hints!???? Quote Link to comment Share on other sites More sharing options...
reded Posted July 20, 2005 Report Share Posted July 20, 2005 Its prolly got a lotta carbon gumming up the works inside. Sometimes you hafta get pretty rowdy with em! Quote Link to comment Share on other sites More sharing options...
quad4me Posted July 20, 2005 Author Report Share Posted July 20, 2005 bUMp anyone confirm? Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted July 20, 2005 Report Share Posted July 20, 2005 They get gummed up and prolly have some sharp edges that are catching on the side. Might start spraying some PB penatrant or carb cleaner to break down the gunk and may have to pry alittle around the rivet hole areas. Be patient i know its hard. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted July 20, 2005 Report Share Posted July 20, 2005 I don't know about the 2 into 1 but I couldn't get my fmf silencers apart for crap either. Had to beat the crap out of them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.