Dunsmoor86 Posted July 15, 2005 Report Share Posted July 15, 2005 I tryed running 330-360;s and it would bog really bad until I got into the power band. I have he following mods: Ported Cylinders Ported reed cages K&N (no lid) bored .40 over head milled .30 plus 4 timing fmf fattys boysen reeds i am running 320's now and it is running good but just seems lean number wise to me? (i have 27.5 piolts and stock needles on the 2nd clip from the top) Quote Link to comment Share on other sites More sharing options...
g-force Posted July 15, 2005 Report Share Posted July 15, 2005 (edited) I tryed running 330-360;s and it would bog really bad until I got into the power band. I have he following mods: Ported Cylinders Ported reed cages K&N (no lid) bored .40 over head milled .30 plus 4 timing fmf fattys boysen reeds i am running 320's now and it is running good but just seems lean number wise to me? (i have 27.5 piolts and stock needles on the 2nd clip from the top) 392684[/snapback] i have simuliar mods with coolhead and t5's,pod filters and i run 330 mains stock pilot and needle in middle position. Edited July 15, 2005 by g-force Quote Link to comment Share on other sites More sharing options...
fixitrod Posted July 15, 2005 Report Share Posted July 15, 2005 Maybe you should drop your needle one before changing the main again. The main does sound right for fatty's. My fatty's liked a lean needle when I had stock carbs. Quote Link to comment Share on other sites More sharing options...
Dunsmoor86 Posted July 15, 2005 Author Report Share Posted July 15, 2005 I was running my needle in the 3rd clip. I also tryed the 4th clip and the 2nd clip just seems to run the best. Thanks for the help just didn't want to run her to lean. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.