EXtreme- Posted July 11, 2005 Report Share Posted July 11, 2005 I'm not getting enough "throw" on my clutch cable. the cable is new, its installed correctly, the perch is adjusted all the way out to almost tight. could the push lever be installed in the wrong position, groove, etc? the problem is that it creeps and neutral is really tuff to find when it's running. Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted July 11, 2005 Report Share Posted July 11, 2005 (edited) Lots of variables that it could be. Too long of cable, not enough throw on aftermarket lever/perch, worn clutch components, center screw inside clutch cover not adjusted correct. etc. Might want to read this post: Smokin Clutches /http://www.bansheehq.com/forums/index.php?showtopic=47701 Edited July 11, 2005 by FASTOYS Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.