BRIAN BANSHEE Posted July 10, 2005 Report Share Posted July 10, 2005 as you know i have had a problem with my tors since my rebuild. So last tuesday i put in back in the dealer shop (first mistake) i tell him the problem and he says its the right tors switch. So i say i don't care how much it costs just fix the damn thing. Friday i go in and the bike is done, so i happy right... WRONG!! the mechanic says to me that for two tors switches it would be $350 CAN, and that he didn't want to make me pay for that cause it was two expensive. So what he did was cut the wires of the stockers, and put on two from some type of yamaha skidoo. it was the biggest hack job that i have ever senn but it said it would work and that i would never have trouble with it again. SO i standin there madder then a deaf mute playin bingo with bingo tryin to yell bingo, cause i can't believe what he's tellin me. But me being stupid i say well whatever will make th FUC*IN thing run i don't care. SO i pay for it which cost me $180, then he has the balls to tel mel that IF by some chance it doesn't work it's not his problem. So i say fuck it he said that it would be alright and i wouldn't have a problem. Then it happened. Saturday morning i'm going in the road up to my cabin and the fuckin thing starts to act up. I get off the bike and i look at the wires and all fuckin four have come apart. The stupid fuc* at yamaha never twisted the wires, he just soldered the two ends together and put about 5inches of heat shrink on it. Then i get back on start it up and it runs fine...................for about forty five seconds and all the gas it would take was about 1/8 throttle just enough to move it. so tomorrow i'm going in and i'm going go fuckin retarded at somebody!!! MAN I HATE DEALERS!!!!!!! Quote Link to comment Share on other sites More sharing options...
aguita Posted July 10, 2005 Report Share Posted July 10, 2005 why didnt u just got the tors removal kit?? much simple than dealing with dealers.. Quote Link to comment Share on other sites More sharing options...
Bansh88 Posted July 10, 2005 Report Share Posted July 10, 2005 really man. 86 TORS alotgether. The kit is cheap and install is somewhat simple. Even the dealer would do it for less than $180 I would think. I wonder why the dealer didn't reccomend removal of the TORS. Quote Link to comment Share on other sites More sharing options...
Otis Posted July 11, 2005 Report Share Posted July 11, 2005 Hey Canadians do get angry.......there's a first....... If you don't get the removal kit, how bout just unpluging them??? I wonder why the dealer didn't reccomend removal of the TORS. Cause if something was to go wrong (stuck throttle) guess whos ass it is.... Quote Link to comment Share on other sites More sharing options...
PyRo_ZaCh Posted July 11, 2005 Report Share Posted July 11, 2005 i realy dont get the big deal about stuck throttel. . .pull in clutch, hit kill switch, its happend to me before (tors removed when i got the quad) from goin through water and stuff and thats all i did. Quote Link to comment Share on other sites More sharing options...
BRIAN BANSHEE Posted July 11, 2005 Author Report Share Posted July 11, 2005 HA HA!!!!!!!!! SUCCESS i unpluged it and now the bike runs like a savage thanks. I didn't want to have to do it but whatever makes it work i guess. does anyone have any suggestions on what i could use to keep water and dirt out of the connection? Quote Link to comment Share on other sites More sharing options...
BRIAN BANSHEE Posted July 11, 2005 Author Report Share Posted July 11, 2005 i was told by a bunch of people that the tors removal kit was a bitch to put o. Guess i should have checked with the guru's on the HQ first. Quote Link to comment Share on other sites More sharing options...
racer Posted July 12, 2005 Report Share Posted July 12, 2005 i was told by a bunch of people that the tors removal kit was a bitch to put o. Guess i should have checked with the guru's on the HQ first. 391177[/snapback] you gotta be handy with a drill. it requires drilling into the side of the carb and them tapping the whole to accept an idle screw. But i say, fuck idle. Quote Link to comment Share on other sites More sharing options...
Otis Posted July 12, 2005 Report Share Posted July 12, 2005 does anyone have any suggestions on what i could use to keep water and dirt out of the connection? just leave em hangin..if your really woried about it, i guess electrical tape would do the trick. the removal kit isnt all that hard to do..everything comes with it, so you dont have to go buy a tap or drill bit.... the instructions are easy to follow too.... Quote Link to comment Share on other sites More sharing options...
Bansh88 Posted July 12, 2005 Report Share Posted July 12, 2005 I just cut and taped my filthy ass connections Quote Link to comment Share on other sites More sharing options...
trail rider Posted July 18, 2005 Report Share Posted July 18, 2005 me and my bro put the removal kit and idle kit on by ourselves, and we're only 16 wasnt that hard Quote Link to comment Share on other sites More sharing options...
QuadingIsLife Posted August 13, 2005 Report Share Posted August 13, 2005 Were they comming on to you? Quote Link to comment Share on other sites More sharing options...
BRIAN BANSHEE Posted August 28, 2005 Author Report Share Posted August 28, 2005 i was out in the piss pour rain yesterday and i guess some water got into the connection and the shee wouldn't start, so i took it home dried it out and blocked the connection with silicone i guess that will work. Quote Link to comment Share on other sites More sharing options...
Wallrat Posted August 29, 2005 Report Share Posted August 29, 2005 You sure it was water and not yellow overspray? Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted August 29, 2005 Report Share Posted August 29, 2005 You sure it was water and not yellow overspray? 409327[/snapback] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.