Jump to content

domes for my noss head?


BANJO

Recommended Posts

well i decided to get me a new head..

so what size domes should i get?? im going to have wisco .20 in my topend..

id like to have a bit more power then what my stock domes pervide..

but i still wana run permium pump gas..

would 20cc be fine?

thanks devin

Link to comment
Share on other sites

well.. im going to order my head tomrow and i still dont really know what domes to put in??

im perty much at sea level and will prob go up to 1000ft..

i hear 20cc and 21cc.. i want to be safe cause i want my new top end to last for at least 6 to 8 months..

what are stock size cc's anything beter then stock id go with..

peace devin

Link to comment
Share on other sites

what are stock size cc's anything beter then stock id go with..

peace devin

389838[/snapback]

Stock is around 24cc ...

 

Standard compression on a 'stock' bore is around 135psi @ sea level. The 21cc dome will give you about 155psi and 20cc about 165-170psi.

 

Rare.

Link to comment
Share on other sites

so will i be all right with 20cc??

with pump gas.. im not to good with all the compression and stuff..

cant know all about all just a little about a little..

peace devin

389846[/snapback]

I would listen to dlnoss, and go with 21's for 93 octane. Stock is 22-23cc domes.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...