superbanshee03 Posted June 27, 2005 Report Share Posted June 27, 2005 I was wondering were would be the best place to get a 4 mil cub motor. I need the crank, carbs and pistons also. I have looked around and cannot decide where to get it at. I have looked at RDZ, Trick, Moretorque and a few others and dont really know, I just want a great builder who will work with me. Who would you guys recommend. Quote Link to comment Share on other sites More sharing options...
Big Blue Posted June 27, 2005 Report Share Posted June 27, 2005 Patriot Racing (backcountry) Southern style racing (Triple) Mccoy performance (more torque) Grand River Racing (Alcoholic) You can PM all of them on Planet Sand. some of them post here on an occasion. Quote Link to comment Share on other sites More sharing options...
dlnoss Posted June 27, 2005 Report Share Posted June 27, 2005 I have dealt with Nate at More Torque, Dan at Patriot, Cameron at Redline, plus Jim at Passion. All these guys know their stuff. Quote Link to comment Share on other sites More sharing options...
rzcolobanshee Posted June 27, 2005 Report Share Posted June 27, 2005 Dan at Patriot, he is the most stand up guy you will ever meet Quote Link to comment Share on other sites More sharing options...
race-a-holic Posted June 28, 2005 Report Share Posted June 28, 2005 I'm probably going to try F.A.S.T. Racing for the blaster I just bought.I saw some banshees he's built and they would run away from my banshee.I haven't seen any cub banshees he's built.He visits banshee HQ sometimes. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted June 28, 2005 Report Share Posted June 28, 2005 I'm probably going to try F.A.S.T. Racing for the blaster I just bought.I saw some banshees he's built and they would run away from my banshee.I haven't seen any cub banshees he's built.He visits banshee HQ sometimes. 386470[/snapback] jeff does build good motors and he can build you a cub motor as well. his turn around time is prolly gonna be less than that of thie big name guys, but you wont see any decrease in quality or performance. he built a cub motor for 9603banshee as far as i know. i would check with him and see how he likes it. good thing about cub cylinders is that they need very little in the "building" department. out of the casting they are pretty much ready to run. Quote Link to comment Share on other sites More sharing options...
9603banshee Posted June 28, 2005 Report Share Posted June 28, 2005 Yup, I had a 350 cub (54x65) built by Jeff at F.A.S.T. Racing and am very pleased...You have to be patient when tuning these motors, because there's so much hidden power in just a little tweaking....Call Jeff at 785-364-5325....he'll be glad to put you on the list!! Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted June 28, 2005 Report Share Posted June 28, 2005 Yup, I had a 350 cub (54x65) built by Jeff at F.A.S.T. Racing and am very pleased...You have to be patient when tuning these motors, because there's so much hidden power in just a little tweaking....Call Jeff at 785-364-5325....he'll be glad to put you on the list!! 386662[/snapback] word... Quote Link to comment Share on other sites More sharing options...
John19 Posted June 30, 2005 Report Share Posted June 30, 2005 (edited) www.sandtrax.com Call Lonnie over at sandtrax he had so many years of experience bulding engines. Shoot him your questions hes an awesome guy. He has done all of my stuff keeping me ontop of all the racing i have done. Edited June 30, 2005 by John19 Quote Link to comment Share on other sites More sharing options...
yfz450ss Posted July 5, 2005 Report Share Posted July 5, 2005 F.A.S.T. has built two for us we werent disapointed. Quote Link to comment Share on other sites More sharing options...
eehsnab2 Posted July 5, 2005 Report Share Posted July 5, 2005 My vote goes to Dan at Patriot. Smokin motor and his turn around time is great... Here's a dyno of the 68 bore/4mm stroker that he built for me. Quote Link to comment Share on other sites More sharing options...
23champ Posted July 8, 2005 Report Share Posted July 8, 2005 My vote goes to Dan at Patriot. Smokin motor and his turn around time is great... Here's a dyno of the 68 bore/4mm stroker that he built for me. Is that with oem cylinders or cubs? what pipes and carbs? Quote Link to comment Share on other sites More sharing options...
bigscary Posted July 8, 2005 Report Share Posted July 8, 2005 I really like my SSR Cheetah.........he did well with mine and the turn around was MUCH faster than any of the other builders..... Quote Link to comment Share on other sites More sharing options...
eehsnab2 Posted July 9, 2005 Report Share Posted July 9, 2005 My vote goes to Dan at Patriot. Smokin motor and his turn around time is great... Here's a dyno of the 68 bore/4mm stroker that he built for me. Is that with oem cylinders or cubs? what pipes and carbs? 389903[/snapback] That's with shearer big bore inframes, 36 PWKs bored to a 38.6, +6 timing, 60/40 race/ pump fuel, cub cylinders with just a little clean up port... here a pic or two... Quote Link to comment Share on other sites More sharing options...
Big Blue Posted July 9, 2005 Report Share Posted July 9, 2005 That's with shearer big bore inframes, 36 PWKs bored to a 38.6, +6 timing, 60/40 race/ pump fuel, cub cylinders with just a little clean up port... here a pic or two... 390385[/snapback] Where did you get your accorn nuts on the cylinders and head? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.