biggun6ss Posted June 5, 2005 Report Share Posted June 5, 2005 I plan on getting my flywheel lightened, my stock head milled, 2 degree advance, and run some clamp on k&n's. I currently have Toomey T6 pipes. Will I feel a big difference. I want to outrun my buddies 450 YFZ, think I can with these mods. He beats me by about 2-3 quads. He always catches me in third gear and passes me. I am getting cubs and many other mods later on but for now this is what I can afford Quote Link to comment Share on other sites More sharing options...
Bansh88 Posted June 5, 2005 Report Share Posted June 5, 2005 What the hell are Cubs? Quote Link to comment Share on other sites More sharing options...
Oilsmoke Posted June 5, 2005 Report Share Posted June 5, 2005 (edited) Should be a Good race Let us know who wins. Cheetah Cubs are after market cylinders. Cubs and T6 are not your best combo. Edited June 5, 2005 by Oilsmoke Quote Link to comment Share on other sites More sharing options...
BdBanshee Posted June 5, 2005 Report Share Posted June 5, 2005 It will make quite a difference, advance the timing at least +4 though. Quote Link to comment Share on other sites More sharing options...
hittintrees srh Posted June 5, 2005 Report Share Posted June 5, 2005 What the hell are Cubs? 378059[/snapback] Cheeta cubs dude. There some sick f**kin jugs, check em out a trinityracing.com Quote Link to comment Share on other sites More sharing options...
Bansh88 Posted June 5, 2005 Report Share Posted June 5, 2005 Man. Here in so cal, I've never heard of "cubs". You out of state guys have some suped up shees. I guess most of our cash here goes into the 3 day trips to Glamis. Quote Link to comment Share on other sites More sharing options...
wesw Posted June 6, 2005 Report Share Posted June 6, 2005 Man. Here in so cal, I've never heard of "cubs".You out of state guys have some suped up shees. I guess most of our cash here goes into the 3 day trips to Glamis. 378113[/snapback] http://www.cpindinc.com/products/Yamaha/Ch...heetah_Cub.html here is what they are talking about. bad mofos Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted June 6, 2005 Report Share Posted June 6, 2005 I plan on getting my flywheel lightened, my stock head milled, 2 degree advance, and run some clamp on k&n's. I currently have Toomey T6 pipes. Will I feel a big difference. I want to outrun my buddies 450 YFZ, think I can with these mods. He beats me by about 2-3 quads. He always catches me in third gear and passes me. I am getting cubs and many other mods later on but for now this is what I can afford 378055[/snapback] I would say go +4 degrees timing and if you can get about 30 or 40 lbs more compression by milling your head or installing a cool head it will help a ton ! Maybe you could splurge for some V-Force as they would give ya a nice gain !! Bansh88 , These new Cheetah Cubs are a smaller version of the Cheetah cylinders. They are some REAL runners to be reckoned with! We just sent a 4mm set out to Texas and he called me saying they are BADA$$ ! He said on asphalt it pulled up in 5th and 6th gear, WITH A +6 SWINGARM !! Quote Link to comment Share on other sites More sharing options...
yfz450ss Posted June 6, 2005 Report Share Posted June 6, 2005 (edited) yeah go ahead and buy a cool-head now and you can put it on your cubs later thats what i did.and the v-vorce reeds will help also. a say do mods that will tranfer over to your cubs. also get with fast to get your cubs his port work rocks. thanks to jeff at F.A.S.T. the cubs freakin haul a$$ Edited June 6, 2005 by yfz450ss Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted June 6, 2005 Report Share Posted June 6, 2005 yeah go ahead and buy a cool-head now and you can put it on your cubs laterthats what i did.and the v-vorce reeds will help also. a say do mods that will tranfer over to your cubs. also get with fast to get your cubs his port work rocks. thanks to jeff at F.A.S.T. the cubs freakin haul a$$ 378223[/snapback] Glad it is running good for ya Steve! Cant wait till you get it dialed in on the jetting , just think , It runs THAT good running wayyyyy fat , how good its gonna run when right on and loosened up! Call me tomorrow when you get it on the dyno. Quote Link to comment Share on other sites More sharing options...
1sreamin350 Posted June 6, 2005 Report Share Posted June 6, 2005 (edited) yeah go ahead and buy a cool-head now and you can put it on your cubs laterthats what i did.and the v-vorce reeds will help also. a say do mods that will tranfer over to your cubs. also get with fast to get your cubs Edited June 6, 2005 by 1sreamin350 Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted June 6, 2005 Report Share Posted June 6, 2005 I dont have the "cubs" but I do have Jeff's porting and all I have to say is daMN!! That man knows how to turn a banshee into a beast. I have great low end and unbelievable topend. This is on his strong play port. It's like I have the best of both worlds, low end and top. Even my brother with the yfz450, that is into MXing, could'nt get enough of the shee. To top it off, Jeff has awesome customer service skills! Thanks again Jeff @ F.A.S.T. 378273[/snapback] It was prolly the F.A.S.T. Racing T-shirt that added several bike lengths. jk lol Appreciate the comments let me know if you need anything! Quote Link to comment Share on other sites More sharing options...
XxMeltIcexX Posted June 6, 2005 Report Share Posted June 6, 2005 What kind of port jobs do you do and how much $$?? Eric Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted June 6, 2005 Report Share Posted June 6, 2005 What kind of port jobs do you do and how much $$?? Eric 378280[/snapback] Usually play or Drag and ALways depends on customers needs! You have a pm. By the way, the pic in your profile is badass! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.