Jump to content

single carb setups


Recommended Posts

Trinity works with stock airbox setup, no mods necessary. The Graydon requires you to move the airbox back and/or mod the box and stuff. Kind of a PITA from what I've heard. Some feel they have the same power output, but others say they feel the Graydon may have a slight bit more torque, don't really know and neither has been really tested.

 

You can search for Graydon, 2-1, single carb, and any combination you can think of and will come up with LOADS of info. There was a big Graydon thread a while back, just do some tricky searching and you'll have plenty of info.

 

Scott

Link to comment
Share on other sites

Comment on that airbox thing. I have a trinity 33 cv set up with the airbox adapter and I'll be danged if I can get the thing to line up without cutting on my airbox mounts.

Link to comment
Share on other sites

Comment on that airbox thing. I have a trinity 33 cv set up with the airbox adapter and I'll be danged if I can get the thing to line up without cutting on my airbox mounts.

369332[/snapback]

 

never had a problem hooking up the trinity setup to a stock airbox. I usually mount the manifold with the rubber boot to the cylinders and put the carb and the airbox together then slide the airbox/carb into the rubber boot and bolt the airbox carb. You can just cut the front airbox mounts off if you want, it'll make it easier.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...