1sreamin350 Posted April 20, 2005 Report Share Posted April 20, 2005 (edited) Janssens +3 +1 Elka shocks w/res The only thing I've noticed, that I dont like, is the bump steer. I just have to adjust the shocks to a softer setting, doesnt cure the problem but helps out alot. Im still glad I bought them but wish I had a adjustable axle now Edited April 20, 2005 by 1sreamin350 Quote Link to comment Share on other sites More sharing options...
DUNEDEMON Posted April 21, 2005 Report Share Posted April 21, 2005 Are your Jansen's camber and caster adjustable? If so, more caster (positive caster) will help the bump steer issue to some extent. I find it strange that softening the shocks lessens it. Quote Link to comment Share on other sites More sharing options...
racer Posted April 21, 2005 Report Share Posted April 21, 2005 DD, the softer setting may make the frontend ride lower and more along the travel range of stock arms. just a thought, lemme know what you think. Quote Link to comment Share on other sites More sharing options...
DUNEDEMON Posted April 21, 2005 Report Share Posted April 21, 2005 DD, the softer setting may make the frontend ride lower and more along the travel range of stock arms. just a thought, lemme know what you think. 358303[/snapback] Perhaps I was reading too much into it, I thought he was talking about compression settings? The only way to "soften srping settings" is to change rates. Changing ride height by the pre-load adjuster will change the tie-rod angle slightly, but he has Jansens, not stock arms. Quote Link to comment Share on other sites More sharing options...
sped Posted July 9, 2007 Report Share Posted July 9, 2007 ya thats cool Quote Link to comment Share on other sites More sharing options...
Jayy Posted July 11, 2007 Report Share Posted July 11, 2007 1screamin350 can you tell more about your LT Janssen setup. How bad is the bumpsteer? Does it feel stable at high speed? How are slow, tight turns? How does it handle whoops, big jumps and landings, etc. I am thinking i am going to go with LSR a arms either in +2+1 or +3+1, but i have also considered the Janssen LT setup. i wish someone around here owned a shee with these set ups so i could try them out, or at least see them in person! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.