bansheegoof Posted April 20, 2005 Report Share Posted April 20, 2005 i recently washed the shee and for the first time ever it would run right.it would idle perfect but any throttle and it acted like it had a rev-limiter, broke up bad.no head lights either.after a day of drying rand perfect but stil nolights.i ride at night alot and need these.anyone had this problem?my stator has volts coming to the yellow and black wire coming out of it.any suggestions?can i check the stator some other way?thanks. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted April 20, 2005 Report Share Posted April 20, 2005 Check to see if the bulbs are both blown. If so you may have a bad voltage regultor or the wire came off of it. It's the silver box near the cdi in the back. Quote Link to comment Share on other sites More sharing options...
bansheegoof Posted April 20, 2005 Author Report Share Posted April 20, 2005 Check to see if the bulbs are both blown. If so you may have a bad voltage regultor or the wire came off of it. It's the silver box near the cdi in the back. 358045[/snapback] i'll try the regulator.its not the bulb though because my tail is out also and that is a 5 led set up.would the bike run ok w/a bad regulator? Quote Link to comment Share on other sites More sharing options...
fixitrod Posted April 21, 2005 Report Share Posted April 21, 2005 .would the bike run ok w/a bad regulator? 358053[/snapback] Yep. You may just have a bad stator, but you said you are getting voltage out righ. Maybe you have a ground that came off. Quote Link to comment Share on other sites More sharing options...
bansheegoof Posted April 21, 2005 Author Report Share Posted April 21, 2005 Yep. You may just have a bad stator, but you said you are getting voltage out righ. Maybe you have a ground that came off. 358068[/snapback] yes is am getting voltage form the stator that increases w/rpm.i will take the flywheel off tommorrrow and see what i have.is this where it is grounded?thanks for the feedback Quote Link to comment Share on other sites More sharing options...
cb67rs1 Posted April 21, 2005 Report Share Posted April 21, 2005 yes is am getting voltage form the stator that increases w/rpm.i will take the flywheel off tommorrrow and see what i have.is this where it is grounded?thanks for the feedback 358103[/snapback] if you are getting voltage from the stator then the regulator has to be bad. Quote Link to comment Share on other sites More sharing options...
bansheegoof Posted April 21, 2005 Author Report Share Posted April 21, 2005 if you are getting voltage from the stator then the regulator has to be bad. 358105[/snapback] Well im trouble shooting.i have a parts banshee that runs.i tried the voltage regulator off of it to no avail.i also took off the dyna ignition and tried the stock computer.no luck still.thanks for the advice all.any other suggestions? Quote Link to comment Share on other sites More sharing options...
FULL_METAL_JACKT_II Posted April 22, 2005 Report Share Posted April 22, 2005 (edited) GET A METER AND MESURE THE RESISTANCE BETWEEN THE YELLOW AND BLACK WIRE!! CLICK HERE 2 TROUBLE SHOOT!!!! QUESTION 31 Edited April 22, 2005 by FULL_METAL_JACKT_II Quote Link to comment Share on other sites More sharing options...
bansheegoof Posted April 26, 2005 Author Report Share Posted April 26, 2005 GET A METER AND MESURE THE RESISTANCE BETWEEN THE YELLOW AND BLACK WIRE!!CLICK HERE 2 TROUBLE SHOOT!!!! QUESTION 31 358533[/snapback] thank you for the link..very good.if my ohms are over.38 like it says.means that the stator is bad?.6ohms is what i read Quote Link to comment Share on other sites More sharing options...
bansheegoof Posted May 4, 2005 Author Report Share Posted May 4, 2005 so stil have no lights what so ever.heads or tails.just put on a new stator and nothing.can anyone tell me where to go next?i have to have lights i ride all the time at night.......thanks to all for the help so far.btw the way very good link full metal........ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.