AnthonyG213 Posted June 18, 2005 Report Posted June 18, 2005 yea i got both washers on and i followed all of the clymers instructions. Could it be the water impellerhitting some plastic. if i have to remove my clutch cover can i reuse the oil and coolant that i have to remove. Quote
AnthonyG213 Posted June 19, 2005 Report Posted June 19, 2005 I reopened the clutch cover and everything was installed right. Is there suppose to be a o ring behin the clutch basket. In my clymers it shows one but i cant find it. Anything i should look for? Quote
locogato11283 Posted June 19, 2005 Report Posted June 19, 2005 I reopened the clutch cover and everything was installed right. Is there suppose to be a o ring behin the clutch basket. In my clymers it shows one but i cant find it. Anything i should look for? 383237[/snapback] no o ring. are you sure you have the clutch adjusted right? if you pull in the clutch it may be a little hard to roll, but you should be able to move it. Quote
AnthonyG213 Posted June 19, 2005 Report Posted June 19, 2005 with all possible slack the clutch arm aligns with the crankcase. I will readjust it. But when i had the cover on and everything ready the bike made a noise like a drill like it was hitting. It did have to push in the clutch cover prety hard to get it in. Right now im lost and since all else was done right i believe it could be the water impeller but i never touched it. Quote
AnthonyG213 Posted June 20, 2005 Report Posted June 20, 2005 Finally fixed my problem thanks to Jeff. I would have never messed with the kickstarter if he didnt suggest looking at the spring behind the kickstart gear. The spring was not in that hole in the crank case so the spring and stop lever would spin around. Its all good to go now i just gota ride. I can roll the bike but its a little hard. It tugs alot and it wont roll down my driveway with the lever pressed in. Tomm. i will ride and maybe it can break in. Or i will try my stock perch and lever Quote
FASTOYS Posted June 20, 2005 Report Posted June 20, 2005 Finally fixed my problem thanks to Jeff. I would have never messed with the kickstarter if he didnt suggest looking at the spring behind the kickstart gear. The spring was not in that hole in the crank case so the spring and stop lever would spin around. Its all good to go now i just gota ride. I can roll the bike but its a little hard. It tugs alot and it wont roll down my driveway with the lever pressed in. Tomm. i will ride and maybe it can break in. Or i will try my stock perch and lever 383634[/snapback] Glad you found the problem. Sometimes those little noises can be hard to track down. Quote
AnthonyG213 Posted June 21, 2005 Report Posted June 21, 2005 Yeeeeeeeeeeaaaaaaaahhh This clutch is TIGHT you can feel the difference. It sure made my bike pull stronger. Super impressed with the clutch and especially Jeffs service. The Spring Shift Mod works so good that i shift into neutral for fun now By the way Jeff With the lever pulled in my bike rolls super smooth so the problem went away after a long hard ride. Quote
locogato11283 Posted June 21, 2005 Report Posted June 21, 2005 everyone needs to give me $5 for recommending jeff to everyone...hey jeff, my XL shirt is a little big on me. whats my chances of gettin a large??? i promsie ill get you some more business... Quote
FASTOYS Posted June 21, 2005 Report Posted June 21, 2005 everyone needs to give me $5 for recommending jeff to everyone...hey jeff, my XL shirt is a little big on me. whats my chances of gettin a large??? i promsie ill get you some more business... 384006[/snapback] lol , I will see what i can do for you. AnthonyG, Glad it came around as i thought it would!! Enjoy!! Quote
Otis Posted June 21, 2005 Report Posted June 21, 2005 Not that he needs it, but another vote for great customer service from Jeff. I ordered some things from him today.. everyone needs to give me $5 for recommending jeff to everyone... Check's in the mail....... Quote
dajogejr Posted June 21, 2005 Author Report Posted June 21, 2005 I'm only asking for 1 dollar per reference...Jeff. Let the bidding war begin...LOCO!! Quote
locogato11283 Posted June 21, 2005 Report Posted June 21, 2005 I'm only asking for 1 dollar per reference...Jeff. Let the bidding war begin...LOCO!! 384097[/snapback] no no no. i brought jeff's clutch parts into the forum. i reserve all rights hereby making me the only person who should recieve royalties from it... Quote
dajogejr Posted June 21, 2005 Author Report Posted June 21, 2005 Yeah...but he didn't port your motor. Our contract states that your have not fufilled your end, therefore all proceeds are negated and turned over to me... I can't wait to have him dive into my motor...If I didn't just put the down payment on my first house...he'd have my motor on his bench right now.... At least I have my very own garage...all mine all mine...to work on her.... Quote
badassbanshee479 Posted June 22, 2005 Report Posted June 22, 2005 I wanted to get on here and add to the long list of people on here that have had great customer service and asome products from jeff. clutch carbs and shift spring all fit great and work bad ass would recamend to anyone. ps jeff did you get my pm about the paddle tires and such?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.