Jump to content

Jetting


Recommended Posts

What jets should I be running?

 

155 psi compression (on 50/50 super/race gas)

.30 over

+5deg ignition

Keinin PJ 34mm carbs no air box

toomey t5

cool head with 18cc domes

stage 3 port (Shop unknown)

at about 3500 ft elevation..

between 80-90 degrees

40-50% humidity

 

 

Thanks Joe

Edited by NOSJunkie
Link to comment
Share on other sites

Honestly I think the person who did your porting could tell you better than we could. It all depends on what type of porting and how much it's ported as to what your jets should be....The best advice we can give is to do a plug chop and jet accordingly :shrugani: There is no "standard" for jetting, every bike is different to some degree.

Link to comment
Share on other sites

What jets should I be running?

 

155 psi compression  (on 50/50 super/race gas)

.30 over

+5deg ignition

Keinin PJ 34mm carbs no air box

toomey t5 

cool head with 18cc domes

stage 3 port (Shop unknown)

at about 3500 ft elevation.. 

between 80-90 degrees

40-50% humidity

Thanks  Joe

349928[/snapback]

 

If your looking for a starting point try 165 mains and 58 pilots? This is suggested jetting for dual 35's from the Trinity site....might be close for your PJ 34??? In my single PWK 39mm, I run a 165 main and 42 pilot at 3000 feet...Good luck.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...