jag706 Posted March 7, 2005 Report Share Posted March 7, 2005 Alright, alright, I know some of you guys are gonna dogg me for not doing it mysel,f but, I really don't have the time to do it. I just wanna ride the damn thing I just want to rebuild the top end. I saw at RMATV the kit goes for $140 and depending if the juggs need to be rehoned it may be a little more. What do you guys say is a good price for a top end rebuild by the local shop dude???? If it's to much am doing it my damn self Quote Link to comment Share on other sites More sharing options...
Capone Posted March 7, 2005 Report Share Posted March 7, 2005 dunno total... round here they charge 65$/hr. I can do a topend in an hour, with boring and that already done... so pretty much what ever they wanna rape you for...lol. Quote Link to comment Share on other sites More sharing options...
white trash Posted March 7, 2005 Report Share Posted March 7, 2005 Yea man, take the jugs off and have them bored if nessesary, then set aside an hour or two one day and git er done. Its super easy and doesnt take that much time. Quote Link to comment Share on other sites More sharing options...
NEVER SATISFIED Posted March 7, 2005 Report Share Posted March 7, 2005 DEF DO IT YOURSELF... IF YOUR CYLINDERS ARE BAD AND CAN NOT BE HONED OUT THEN GO FOR THE BORE. BUT IF YOU BORE IT DONT FORGET THAT BORING IT TO A 66 (WHICH IS MAX PISTON SIZE ON STOCK SLEEVES) WONT GIVE YOU ANY GAIN BY ITSELF. I SAY TEAR IT DOWN ORDER YOU A RACE LOGIC PORT TEMPLET IF NOT PORTED ALREADY SINCE YOUR GOING TO HAVE THE JUGS... HAHA I SAID JUGS.... OFF. TAKE ER DOWN TO A MACHINE SHOP WITH THE NEW PISTONS AND THAT RACE LOGIC TEMPLET... ROUND HERE A GUY DOES IT FOR 50 A JUG.. I SAID JUG... AND THEN PICK THOSE BABIES UP SLAP THE BEARINGS AND PISTONS ON AND DONT FORGET THE GASKETS.. AND YOUR DONE... TAKE A WEEK MAX. Quote Link to comment Share on other sites More sharing options...
DIRTBIKEZ Posted March 7, 2005 Report Share Posted March 7, 2005 Alright, alright, I know some of you guys are gonna dogg me for not doing it mysel,f but, I really don't have the time to do it. I just wanna ride the damn thing I just want to rebuild the top end. I saw at RMATV the kit goes for $140 and depending if the juggs need to be rehoned it may be a little more. What do you guys say is a good price for a top end rebuild by the local shop dude???? If it's to much am doing it my damn self 334723[/snapback] Give Diggin' a call and see if they can give you a rough quote over the phone. I'd be interested to know what they do it for. Quote Link to comment Share on other sites More sharing options...
jag706 Posted March 8, 2005 Author Report Share Posted March 8, 2005 JUGS... HAHA I SAID JUGS I was thinkin the same damn thing yeah I was just curious fellas cause I think it's that time but the problem is time. I was readin and lookin and it does look like it wouldn't be that much of a ball buster so am kinda hoping he gives me a crazy price just so I could do it myself... unless he gives me a crackhead price then it's off wit her head about the template I was thinking if I end up doin it myself I was gonna send out the juggs..uhhh... huhuhuhu I said juggs too... to get an Eric Gorr port job Give Diggin' a call and see if they can give you a rough quote over the phone. I'd be interested to know what they do it for Sounds like an idea Hmmmmm if I can just remember what I did with that damn number Quote Link to comment Share on other sites More sharing options...
rocketboy Posted March 8, 2005 Report Share Posted March 8, 2005 its too easy to pay someone to do it for the bill youll receive typically around here i see tards get there shes rebuilt with a fresh boreing for 400$ (my bummy hurts) Quote Link to comment Share on other sites More sharing options...
jag706 Posted March 11, 2005 Author Report Share Posted March 11, 2005 Give Diggin' a call and see if they can give you a rough quote over the phone. I'd be interested to know what they do it for. wink.gif Just called them today and they said $650 They said that was for the dual piston kit, gaskets, rehoned cylinders, rebuilt carbs, air box cleaning, new plugs, and fluids. Don't remember if anything else was included Not really sure if this is a good price but all I can say is GOTT DAMN !!! Where did I put that damn Haynes maual Quote Link to comment Share on other sites More sharing options...
SHNaY Posted March 11, 2005 Report Share Posted March 11, 2005 I just saw this thread today my buddy took his in for the same thing and paid $750 (but they also changed out his stock reeds petals for new ones) Man I told him next time he wants to get raped to bring me his bike I would be happy to do it for a meer $600-650. Where do you live jag706? I will beat their price by $100 too if you want. Man I should go into business doing this. Quote Link to comment Share on other sites More sharing options...
PolyKarbon Posted March 12, 2005 Report Share Posted March 12, 2005 AIR BOX CLEANING?! NEW PLUGS AND FLUIDS?!?!? ARE YOU KIDDING ME?! HAHAAHAHAHAH! I had a guy bore out both jugs for like 65 bucks all together. Thats the only thing you should have done. Everything else is too freakin easy and takes literally one hour at most. Quote Link to comment Share on other sites More sharing options...
jag706 Posted March 12, 2005 Author Report Share Posted March 12, 2005 (edited) I just saw this thread today my buddy took his in for the same thing and paid $750 (but they also changed out his stock reeds petals for new ones) Man I told him next time he wants to get raped to bring me his bike I would be happy to do it for a meer $600-650. Where do you live jag706? I will beat their price by $100 too if you want. Man I should go into business doing this. 337626[/snapback] Better yet why don't I just use the money your're saving me to fly you out to my house in New York that way I don't even have to take my shee to the shop and I save on time and gas ! YOUR"RE HIRED When can you start Edited March 12, 2005 by jag706 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.