NitroTate Posted February 18, 2005 Report Share Posted February 18, 2005 How much of a difference in jetting do you guys think there would be in going from drag pipes to T5's?? Let me know if you need more info... Quote Link to comment Share on other sites More sharing options...
01bansheeke Posted February 18, 2005 Report Share Posted February 18, 2005 what mods you have tate? what carbs, what jetting now, porting? fill us in on some more info. Quote Link to comment Share on other sites More sharing options...
Ducman Posted February 18, 2005 Report Share Posted February 18, 2005 not much, probably none. Quote Link to comment Share on other sites More sharing options...
NitroTate Posted February 21, 2005 Author Report Share Posted February 21, 2005 not much, probably none. 325947[/snapback] Stock carbs, mild porting, polished the exhaust ports a little, dual K&N filters, reed spacers, that's all I can think of now. I'm going to be dialing it in pretty closely using plug chop and other techniques, I'm just wondering if I'll need to change anything right off the bat when I put the bike back together with the new pipes so it will start. I'm assuming it should start and that the difference between drags and toomeys is not too dramatic. Quote Link to comment Share on other sites More sharing options...
rockgc9 Posted February 21, 2005 Report Share Posted February 21, 2005 I have toomey's and I am running them at a 280 jet. And I have roughly the same shit done that you do. Quote Link to comment Share on other sites More sharing options...
rocketboy Posted February 22, 2005 Report Share Posted February 22, 2005 i would think it would depend greatly on what drag pipes are we talkin about ,in or out of frames ?, i know going from pro circuits to rocket pipes had me doing all kinds of jetting increases ,but your mains on your setup would likely be very close, maybe only a size or two big for t5s im guessing Quote Link to comment Share on other sites More sharing options...
NitroTate Posted February 23, 2005 Author Report Share Posted February 23, 2005 i would think it would depend greatly on what drag pipes are we talkin about ,in or out of frames ?, i know going from pro circuits to rocket pipes had me doing all kinds of jetting increases ,but your mains on your setup would likely be very close, maybe only a size or two big for t5s im guessing 327506[/snapback] They are out of frames,not sure of the brand though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.