badcompany Posted February 18, 2005 Report Share Posted February 18, 2005 This might sound stupid but are you turning the needle one full turn? You can turn them in 1/4 turn increments. Just a thought. Quote Link to comment Share on other sites More sharing options...
squish Posted February 18, 2005 Report Share Posted February 18, 2005 I will bet you 20 grand! I have it in my pocket right now Quote Link to comment Share on other sites More sharing options...
Weirdman Posted February 18, 2005 Report Share Posted February 18, 2005 i just now read it again and it sounds like its way too lean. if you have to choke it to get it to run its not getting enough gas. screw the needle up a few turns and see if it will idle without the choke on..what do the numbers on the needle say? itll read something like 4-2 or 6-2..what do you have in there? 324956[/snapback] Well when I turned the needle the other way it is too much, I tried to adjust it a little bit with the screw on top but... Quote Link to comment Share on other sites More sharing options...
Weirdman Posted February 18, 2005 Report Share Posted February 18, 2005 Locogato is 100% right. My bro has a Lectron, I have watched him work on it many times. Also on the main screw (power jet screw) you should not be turning it in whole turn incerments. Try turning it in 1/4 turn incerments. It wont be as drastic of change, hopefully you be able to get it dialed in that way. let us know. 325195[/snapback] I think it only runs right with the flat end facing towards the back of the bike though? Quote Link to comment Share on other sites More sharing options...
Weirdman Posted February 18, 2005 Report Share Posted February 18, 2005 try this link, I dont think it will work. Carb What is that site to post pics on for free? Quote Link to comment Share on other sites More sharing options...
05bansh Posted February 18, 2005 Report Share Posted February 18, 2005 Ok Weirman- try turning the adjustment screw in all of the way, then start backing it out 1/4 of a turn at a time. Give that a shot. Another very well educated person who might be able to help you out is Dennis Packard from Packard Racing. His website is www.packardracing.com You can post on his website with your question, or give him a call, he knows all about Lectrons. Quote Link to comment Share on other sites More sharing options...
badcompany Posted February 18, 2005 Report Share Posted February 18, 2005 I think it only runs right with the flat end facing towards the back of the bike though? 325665[/snapback] After u turn the needle, you push the needle in and turn it back facing the right way. Quote Link to comment Share on other sites More sharing options...
toolman Posted February 24, 2005 Report Share Posted February 24, 2005 Sorry I have been out of town. Try this first www.lectronfuelsystems.com Fast by gast www.fastbygast.com Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 24, 2005 Report Share Posted February 24, 2005 round part of the needle goes towards the back of the bike. you ever get this thing dialed in? Quote Link to comment Share on other sites More sharing options...
racer Posted February 24, 2005 Report Share Posted February 24, 2005 he knows all about Lectrons. 325788[/snapback] i think he may be the lectron god. Quote Link to comment Share on other sites More sharing options...
05bansh Posted February 24, 2005 Report Share Posted February 24, 2005 i think he may be the lectron god. 328972[/snapback] Fo Shizzle' Quote Link to comment Share on other sites More sharing options...
y2kbanshee9187 Posted February 28, 2005 Author Report Share Posted February 28, 2005 round part of the needle goes towards the back of the bike. you ever get this thing dialed in? 328657[/snapback] Well right now Im waiting for pistons to come in. I am replacing them and have it all torn apart. Hopefully I can get them in this week and then figure out the carb problem. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 28, 2005 Report Share Posted February 28, 2005 dont feel bad. i cant seem to figure out the lectron on my cr500 banshee either. that thing is turning out to be a pain in the ass... Quote Link to comment Share on other sites More sharing options...
y2kbanshee9187 Posted February 28, 2005 Author Report Share Posted February 28, 2005 dont feel bad. i cant seem to figure out the lectron on my cr500 banshee either. that thing is turning out to be a pain in the ass... 330709[/snapback] That the black one you just got? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.