1sreamin350 Posted February 9, 2005 Report Share Posted February 9, 2005 I noticed a loss in power, decided to check the compression an the bad side of the top-end was at 91 the other side was at 110. I'm going to get a top-end kit but just wonderen if this dome is repaiable? Quote Link to comment Share on other sites More sharing options...
01bansheeke Posted February 9, 2005 Report Share Posted February 9, 2005 probably not. I can't really tell how deep they are. but From what i can see, its time for a new domes. what size is it? Quote Link to comment Share on other sites More sharing options...
1sreamin350 Posted February 9, 2005 Author Report Share Posted February 9, 2005 everythin is stock. can you change the domes on stock heads? Quote Link to comment Share on other sites More sharing options...
1sreamin350 Posted February 9, 2005 Author Report Share Posted February 9, 2005 Come on guys Quote Link to comment Share on other sites More sharing options...
NYCBanshee7 Posted February 9, 2005 Report Share Posted February 9, 2005 You probably have to go with an aftermarket head or take is to someone who does Head milling. You could probably get it resurfaced to add alittle more horsepower and still run pump gas. Quote Link to comment Share on other sites More sharing options...
RBD Posted February 9, 2005 Report Share Posted February 9, 2005 If the head has not been milled (stock), it can be repaired by milling and squish-bands reconfigured for about $70.00. Quote Link to comment Share on other sites More sharing options...
ssanddemon Posted February 9, 2005 Report Share Posted February 9, 2005 Factory head on Ebay: $15 to $50. 'Nuff said. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted February 9, 2005 Report Share Posted February 9, 2005 I'd just get one off ebay like said above and have it milled .030. You can still run pump gas with that and it will make sure you are dealing with a good surface. You can also use RB's option but that will run $70 to $90. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.