a&sbanshee Posted February 2, 2005 Report Share Posted February 2, 2005 1997 a&s 350 banshee, mods: level 6 non triple exhaust port done by dan hull 1-5override done by dan hull stock trued and welded crank with new rods upper and lower rods bearings and tz bearing on the drive side of the crank all done by dan hull prodesign cool head with 18cc domes 160psi of compression stock modified reed cages with boyeson carbon fiber reeds aluminum intakes 36mm mikuni Gas carbs lightened flywheel&pro-design timing plate hinson basket with clutch saver and porcelian clutch ball 6 toomey springs with barnett steels and r-6 fibers powerpro drag pipes no silencers. dual fed pingle petcock +8 chrome grr stock style swing arm broomstick handle bar with tether kill switch chrome clutch cover clear radiator hoses cut and tweed covered seat this is a really strong running motor it went consistant 7.0's and some 6.80's last year while on alky carbs with a 240lb rider and i have yet to run it since going back to gas as my plans for this year were to spray nos on the bike to make an attempt to see some 6.0's i have many spare parts such as a-arm spindles steering stem stock carrier tie rods stock head stock swing arm and so on everything i have for a banshee you can have with purchase even the chassis i ran last year which has a small motor mount problem that could be fixed with a little tlc. this bike comes complete with plastics as well even though i dont have them pictured cuz these were takin when the new chassis was put together about 3 weeks ago. this would be a good starting point for a drag racer as the bike is priced right to sell. i am asking 3000 dollars firm any questions feel free to leave them here contact me by e-mail@ da_original_kraka@yahoo.com or give me a call 803-428-6952 and just ask for alex or leave a message if no answer please serious inquires only if someone out of the nc/sc/ga area wants this bike we will have to arrange shipping which IS NOT included in the price of the bike and will be the buyers duty to pay for the shipping and so on here are some pictures of the bike and the one with all the plastic is the same motor and all just a different chassis Quote Link to comment Share on other sites More sharing options...
a&sbanshee Posted February 2, 2005 Author Report Share Posted February 2, 2005 (edited) anotherr Edited February 2, 2005 by a&sbanshee Quote Link to comment Share on other sites More sharing options...
bogart Posted February 3, 2005 Report Share Posted February 3, 2005 looking for trades nice bike.cant wait to have dan build me one Quote Link to comment Share on other sites More sharing options...
a&sbanshee Posted February 7, 2005 Author Report Share Posted February 7, 2005 bump come on guys ill let her go for 3000 need to sell to pay off somethings and start a new project Quote Link to comment Share on other sites More sharing options...
a&sbanshee Posted February 9, 2005 Author Report Share Posted February 9, 2005 bump bump bump Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.