frocashmoney24 Posted January 2, 2005 Report Share Posted January 2, 2005 (edited) allright heres a list Engine Fresh EBC clutch New stock clutch basket Pro Design fully adj. Timing plate (set at +5 right now) Weisco hot rods and crank Fresh Weisco .80 Prolight pistons Brand new Noss coolhead with 21cc domes 33mm Pwk Keihn carb, with Trinity stage 4 , 2-1 intake system Single K&N filter with outerwear, with Prodesign plate for 2-1 system TDR epoxy reeds Procircut Platinum pipes and silencers Mild MX port and polish NGK plug wires and caps Inline water cooler Boltons DG nerfbars with new nets DG bumper New DG grab bar Billet parking brake block-off Epoxy case saver Race full engine skidplate Locknut Axle nut Epoxy chain sliders and roller Chrome and Polished Chrome Grill Chrome Gas cap Chrome Water Pump insert Chrome Clutch cover instert Chrome Flamehead dipstick Chrome rear brake ressy cover Polished front brake lever Polished rear brake lever Polished Shift lever Polished Kick starter Controls Renthal Fat bars UFO hand guards RTC clutch pertch and lever Prodesign Kill switch Moose grips MotionPro Twist throttle Looks New Front plastics, tank cover and rad. Cover With Alba flame graphics Ceet Seat cover Newer stock rear plastics with Ceet graphics and race sticker kit Red moose shock covers all the way around Renthal red cross bar pad Custom Water temp. guage Rear fender Brackets Clear stator cover Rebuilt kick starter Chassis/Tires 95 engine and frame boltons 91 frame with J-A-arm conversion Painted gloss black Armadillo +2+1 Racing A-Arms New front 10inch .190 ITP rims with 20inch Kendra Klaw MX tires Rear 8 inch .190 ITP 18inch Turf tamers MX tires Other New All Balls race bearings all the way around New Bushings all the way around New EBC brake pads all the way around New KMC 520 O-ring chain New sprockets all the way around Along with everything else, full brakes, frame, rims/tires, any engine part, steering stem, axle, everything off a banshee that you need, this was a whole banshee today, so everything you need to ride is on there, im peicin out the engine to, so you can get cases, crank, etc.. thanks guys make good offers on everything Edited January 2, 2005 by frocashmoney24 Quote Link to comment Share on other sites More sharing options...
Indubitably Posted January 2, 2005 Report Share Posted January 2, 2005 do you have stock front shocks on there? Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted January 2, 2005 Author Report Share Posted January 2, 2005 yea there just stockers Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted January 2, 2005 Report Share Posted January 2, 2005 how much for your 2-1 set up and also your a-arms . and you jugs and crank and what kinda port do you have with them .. i do alot of trail but i go to the dumes a couple times too, just wondering if it would work just geting your jugs or getting a port and i would need pistons too . oh and your front tires would be nice too .. thanks for the pricing Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted January 2, 2005 Report Share Posted January 2, 2005 Fro, PM me a price on the following- chrome back brake rez cover front plastics rebuilt kickstart Later Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted January 3, 2005 Report Share Posted January 3, 2005 I've seen this in person,pictures don't do it justice. free bump Quote Link to comment Share on other sites More sharing options...
brock_fuzzy_69 Posted January 3, 2005 Report Share Posted January 3, 2005 Epoxy chain sliders and roller still got those??? Quote Link to comment Share on other sites More sharing options...
brock_fuzzy_69 Posted January 3, 2005 Report Share Posted January 3, 2005 oha re the a arms heim joint or ball joint in style?? Quote Link to comment Share on other sites More sharing options...
jumpcuts Posted January 3, 2005 Report Share Posted January 3, 2005 How much for the skid plate and bumper shipped to 01440? What kind of swingarm is that? Quote Link to comment Share on other sites More sharing options...
stclark816 Posted January 3, 2005 Report Share Posted January 3, 2005 PM sent Quote Link to comment Share on other sites More sharing options...
blasterak Posted January 3, 2005 Report Share Posted January 3, 2005 how much for the front kenda klaws on the itp rims and are they offset if so what is the offset thanks Quote Link to comment Share on other sites More sharing options...
01bansheefox Posted January 3, 2005 Report Share Posted January 3, 2005 Chrome gas cap, and clutch lever plz Quote Link to comment Share on other sites More sharing options...
01bansheeke Posted January 3, 2005 Report Share Posted January 3, 2005 (edited) Noss head...pm me a price And the timing plate please...call dibs if the price is right. Edited January 3, 2005 by 01bansheeke Quote Link to comment Share on other sites More sharing options...
Droppedbagged72 Posted January 3, 2005 Report Share Posted January 3, 2005 Shoot me a price on the kill switch and the color, also the twist throttle. Jetski7292@aol.com or pm Thanks. Quote Link to comment Share on other sites More sharing options...
Maxxsmoke Posted January 3, 2005 Report Share Posted January 3, 2005 e-mailed you about the motor ...... price with shipping Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.