rx7500hpt2 Posted July 26, 2005 Author Report Share Posted July 26, 2005 get your new spindle stuff figured out? 396912[/snapback] no I haven't had the time to work on the quad, I left it at my cabin anyway. When I get a carrier for that 500 axle I'll bring the quad home and finally try to finish it. I need the whole rear end off of it so I can put my stock banshee back together and sell it. Quote Link to comment Share on other sites More sharing options...
rx7500hpt2 Posted January 31, 2006 Author Report Share Posted January 31, 2006 Finally fixed my geometry errors for the front end. It can cycle almost 17in of wheel travel now with the correct kingpin angle set. In order to utilize the travel I would have to re-mount the shocks and probably re-valve and spring it$$$. Maybe later, it works pretty dam good with 12in of travel right now. Quote Link to comment Share on other sites More sharing options...
rx7500hpt2 Posted January 31, 2006 Author Report Share Posted January 31, 2006 another Quote Link to comment Share on other sites More sharing options...
Shee-Male Posted January 31, 2006 Report Share Posted January 31, 2006 Thats a solid lookin home fab setup, I think if you go to sandbros.com they have pics of the sundahl frame with the mad wheel travel, they have a spacer on to of the spindle...just a thought. Quote Link to comment Share on other sites More sharing options...
racer Posted April 5, 2006 Report Share Posted April 5, 2006 ya Dean's 'shee is absolutley SICK. its in a different class than htis one though, and 17" is plain fucking crazy. you have my unrelenting praise for DIY frame modifications. Quote Link to comment Share on other sites More sharing options...
mnduner Posted April 5, 2006 Report Share Posted April 5, 2006 your my new idol. fucking sweet setup got any pics of the rear? Quote Link to comment Share on other sites More sharing options...
DRI4life Posted April 5, 2006 Report Share Posted April 5, 2006 thats how we do it in So Cal... fuking badass.... i have a million ?s but could you post a pic a full bump please.... and also why not run a 2.0 king in there with such a big front end... tiny bit heavier but you could seriously jump like 200 feet ...... more pics very interested and i havnt read the whole thread yet but how is the body roll on that.... Quote Link to comment Share on other sites More sharing options...
rx7500hpt2 Posted April 11, 2006 Author Report Share Posted April 11, 2006 Its actually a little stiff with the elkas. Quote Link to comment Share on other sites More sharing options...
rx7500hpt2 Posted April 11, 2006 Author Report Share Posted April 11, 2006 I'm almost done with the rear. Had all the plate waterjet cut. Machined the big tube for the LSR LT500 roundhouse carrier and the front pivot tube at the frame. All 6061 aluminum. Quote Link to comment Share on other sites More sharing options...
rx7500hpt2 Posted April 11, 2006 Author Report Share Posted April 11, 2006 90% done, just need to machine some pieces for the shock mount. Bought a TCS no link shock off ebay. Quote Link to comment Share on other sites More sharing options...
willow2679 Posted April 11, 2006 Report Share Posted April 11, 2006 thats going very good it was a long time I didnt see an update of your badass shee Quote Link to comment Share on other sites More sharing options...
rx7500hpt2 Posted April 20, 2006 Author Report Share Posted April 20, 2006 Rear shock mount done. Quote Link to comment Share on other sites More sharing options...
racer Posted April 21, 2006 Report Share Posted April 21, 2006 are you a mechanical engineer or professional fabricator by trade? cause that looks amazing. Quote Link to comment Share on other sites More sharing options...
rx7500hpt2 Posted April 21, 2006 Author Report Share Posted April 21, 2006 I learn by doing. I built it all in my garage. Also have machine shop lab hours over at orange coast college. Quote Link to comment Share on other sites More sharing options...
decon Posted April 23, 2006 Report Share Posted April 23, 2006 lookin real good...how much has the project cost you so far? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.