MDS2106 Posted December 8, 2004 Report Share Posted December 8, 2004 has anyone done the shift star mod. on their stock star? what tools are needed to do it. I thought maybe i could do it with a bench grinder Quote Link to comment Share on other sites More sharing options...
Otis Posted December 9, 2004 Report Share Posted December 9, 2004 send a PM to boonman. He's the one most of us send our stuff (head/flywheel/shiftstar......) to. Quote Link to comment Share on other sites More sharing options...
boonman Posted December 9, 2004 Report Share Posted December 9, 2004 Bench grinder will work alright. Although, it will be severely uneven, unless you have countless hours on a grinder. At any rate, you won't be able to do the neutral backcut with none other than a vertical, (or with some managery, a horizontal mill...)mill. This will give you smoother shifting, and less missed shifts, but the neutral backcut is a must if you wish to find neutral with the engine running. Quote Link to comment Share on other sites More sharing options...
boonman Posted December 9, 2004 Report Share Posted December 9, 2004 I almost forgot, you will need a new clutch cover gasket, and you will have to remove the clutch, which I use an air impact for. Once that is off, you will need a phillips screwdriver, (and sometimes an impact driver) to get the screw out of the shift drum. The Clymer manual shows the star, and the internals. Also, Meat's site, www.TheBansheeZone.com I believe has some pics as well.... Quote Link to comment Share on other sites More sharing options...
banshee370 Posted December 9, 2004 Report Share Posted December 9, 2004 Bench grinder will work alright. Although, it will be severely uneven, unless you have countless hours on a grinder. At any rate, you won't be able to do the neutral backcut with none other than a vertical, (or with some managery, a horizontal mill...)mill. This will give you smoother shifting, and less missed shifts, but the neutral backcut is a must if you wish to find neutral with the engine running. 290853[/snapback] Hey man... I've got a star I need modded for a friend... PM me you addy again so I can send it out... I also need your updated email addy for my site (your page) Thanks dude Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted December 9, 2004 Report Share Posted December 9, 2004 I almost forgot, you will need a new clutch cover gasket, and you will have to remove the clutch, which I use an air impact for. Once that is off, you will need a phillips screwdriver, (and sometimes an impact driver) to get the screw out of the shift drum. The Clymer manual shows the star, and the internals. Also, Meat's site, www.TheBansheeZone.com I believe has some pics as well.... 290855[/snapback] If your case gasket is in good shape you can probably re-use it. I have re-used mine a few times now without any issues. Quote Link to comment Share on other sites More sharing options...
Redlined Posted December 9, 2004 Report Share Posted December 9, 2004 I did mine with a Dermal Tool and some grinding stones. You can even do the neutral back cut if you have a steady hand, with a Quote Link to comment Share on other sites More sharing options...
Dr. Overkill Posted December 9, 2004 Report Share Posted December 9, 2004 If your case gasket is in good shape you can probably re-use it. I have re-used mine a few times now without any issues. 290857[/snapback] I haven't heard of this back-cut before. Got links? Also, is this better than this gizmo I've heard good things about? http://www.shiftpro.com/shift-pro_new_001.htm I have an '00 shee, and it's next to impossibe to get into neutral with the engine running. Before that, I had a '96 shee and after 6 years with it, neutral was never as hard to find as it is on this '00. TIA, _dennis Quote Link to comment Share on other sites More sharing options...
banshee370 Posted December 9, 2004 Report Share Posted December 9, 2004 I haven't heard of this back-cut before. Got links? Also, is this better than this gizmo I've heard good things about? http://www.shiftpro.com/shift-pro_new_001.htm I have an '00 shee, and it's next to impossibe to get into neutral with the engine running. Before that, I had a '96 shee and after 6 years with it, neutral was never as hard to find as it is on this '00. TIA, _dennis 291009[/snapback] Here is my Shift star thats back cut Quote Link to comment Share on other sites More sharing options...
Fireman-hott Posted December 9, 2004 Report Share Posted December 9, 2004 I have a shift-pro and like it, noticed a difference immediatly and can find nuetral while the engines running on my '03 Quote Link to comment Share on other sites More sharing options...
MDS2106 Posted December 10, 2004 Author Report Share Posted December 10, 2004 well i did the mod. today with a dremmel tool and a bench grinder looks like it came out really good. however when i pulled my clutch off i notced that the clutch housing has a little play like the ribbits are worn or something i can grab the gear and turn the housing about a 1/4 of an inch each way.is this normal? Quote Link to comment Share on other sites More sharing options...
Flyin_Shee Posted December 10, 2004 Report Share Posted December 10, 2004 Can you buy an aftermarket shift star for the Banshee? My '00 is a pain in the ass to shift into neutral and it misses sometimes. Quote Link to comment Share on other sites More sharing options...
BdBanshee Posted December 10, 2004 Report Share Posted December 10, 2004 I haven't heard of this back-cut before. Got links? Also, is this better than this gizmo I've heard good things about? http://www.shiftpro.com/shift-pro_new_001.htm I have an '00 shee, and it's next to impossibe to get into neutral with the engine running. Before that, I had a '96 shee and after 6 years with it, neutral was never as hard to find as it is on this '00. TIA, _dennis 291009[/snapback] The neutral mod works very well, before I did it to mine it was very difficult to get in neutral with it running, now it's a breeze. Here's a link to a pic of mine for comparison, I don't do these anymore. Shift star with backcut neutral Quote Link to comment Share on other sites More sharing options...
Redlined Posted December 10, 2004 Report Share Posted December 10, 2004 Ron helped me out when I was thinking of doing this. He sent me his images and I went from there. Thanks Ron Quote Link to comment Share on other sites More sharing options...
wodeman Posted December 11, 2004 Report Share Posted December 11, 2004 Can you buy an aftermarket shift star for the Banshee? My '00 is a pain in the ass to shift into neutral and it misses sometimes. 291364[/snapback] Cascade-Innovations.com / Cascade in Oregon had/has them for $30.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.