Ryda85 Posted December 6, 2004 Report Share Posted December 6, 2004 hey guys, i was just basically given a street bike engine, 600cc good condition......was thinking of what i should put it in...im not ready to do this project yet, want to finish up the shee, i was thinking abouit maybe an odyssey or pilot frame....if i cant find one i guess ill try and throw it in a shee...any other ideas? Quote Link to comment Share on other sites More sharing options...
PolyKarbon Posted December 6, 2004 Report Share Posted December 6, 2004 If you can weld, I'd say make your own custom frame and make it street legal. It's what I've always wanted to do. I geuss what you can do with the engine depends on how well you can modify frames. By the way, where did you get that engine? Quote Link to comment Share on other sites More sharing options...
stclark04 Posted December 6, 2004 Report Share Posted December 6, 2004 You could try a Raptor frame or a YFZ450 frame. Quote Link to comment Share on other sites More sharing options...
racer Posted December 6, 2004 Report Share Posted December 6, 2004 YFZ450 frame. 289514[/snapback] uh huh. Quote Link to comment Share on other sites More sharing options...
Ryda85 Posted December 6, 2004 Author Report Share Posted December 6, 2004 my brother in laws friend crashed a bike but salvaged the engine...i dunno a whole big story but i got it now....mwahahah.....i just wanna finish the shee for now, i guess i have some time to think about it. so would a 600cc streetbike engine in a yfz frame beat my pasion 12 port stroker with all the goodies that badly? Quote Link to comment Share on other sites More sharing options...
stclark04 Posted December 6, 2004 Report Share Posted December 6, 2004 so would a 600cc streetbike engine in a yfz frame beat my pasion 12 port stroker with all the goodies that badly? 289648[/snapback] Are you joking? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 6, 2004 Report Share Posted December 6, 2004 so would a 600cc streetbike engine in a yfz frame beat my pasion 12 port stroker with all the goodies that badly? 289648[/snapback] Are you joking? 289726[/snapback] hahaha an eric gorr $200 woods port banshee will beat your passion 12 port stroker. Quote Link to comment Share on other sites More sharing options...
racer Posted December 6, 2004 Report Share Posted December 6, 2004 so would a 600cc streetbike engine in a yfz frame beat my pasion 12 port stroker with all the goodies that badly? 289648[/snapback] Are you joking? 289726[/snapback] hahaha an eric gorr $200 woods port banshee will beat your passion 12 port stroker. 289728[/snapback] how would you know? yes, the streetbike will wax the piss out of nearly any banshee, unless its got a bigger bike motor. Quote Link to comment Share on other sites More sharing options...
bansheebrat Posted December 7, 2004 Report Share Posted December 7, 2004 Seems like I remember a video of you on a Passion stroker smoking a Gorr ported shee run after run after run LOCO...get your facts straight so would a 600cc streetbike engine in a yfz frame beat my pasion 12 port stroker with all the goodies that badly? 289648[/snapback] Are you joking? 289726[/snapback] hahaha an eric gorr $200 woods port banshee will beat your passion 12 port stroker. 289728[/snapback] Quote Link to comment Share on other sites More sharing options...
stclark04 Posted December 7, 2004 Report Share Posted December 7, 2004 Seems like I remember a video of you on a Passion stroker smoking a Gorr ported shee run after run after run LOCO...get your facts straight so would a 600cc streetbike engine in a yfz frame beat my pasion 12 port stroker with all the goodies that badly? 289648[/snapback] Are you joking? 289726[/snapback] hahaha an eric gorr $200 woods port banshee will beat your passion 12 port stroker. 289728[/snapback] 289973[/snapback] Smoking? If ur definition of smoking is pulling away (not much at that) once he hit 6th. Then yeah. I believe that he should have been beating me way more than that, dont ya think? Wouldnt ya think that since Passion porting is so badass that I shouldnt have even had a chance? But shit, what do I know. Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted December 10, 2004 Report Share Posted December 10, 2004 i just put a 17 tooth up front on my banshee, its got a 41 in the rear and i was wondering theoretically how fast it could go on top. Ive got the passion 12 port 4 mill stroker. it seems to run so much better now with it on there. ive drag raced my brother severeal times and dusted him everytime, unlike before when it was pretty close. 241516[/snapback] Quote Link to comment Share on other sites More sharing options...
stclark04 Posted December 10, 2004 Report Share Posted December 10, 2004 291260[/snapback] Yeah, he beat me.. But not as much as the super power pushing perfect passion porting should have. Plus, taller gearing alows for more top speed. And if you can read, once he would hit sixth he would pull away. At the time I was running 14/41. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 10, 2004 Report Share Posted December 10, 2004 ahh yes bansheebrat, you must be a passion follower huh? you guys always get excited. see heres the thing smart guy. you never saw the videos where the gorr ported banshee was whooping mine. in the dirt my brothers banshee would pretty well put the hurtin on my oh so great passion bike. on the pavement it was a different story but then again not really. he would stay with me until i hit 6th gear in which case i was runnin a 17 up front and he was runnin a 14 up front. gee pretty big difference huh? if you want i can make a video dedicated to jims worthless engine and show you all the times my brothers bike whooped mine. seems like you should get your facts straight, and how can you argue with me anyway? do you have a gorr ported bike and a passion one that you raced over and over again? i bet not. rebelbanshee2, that was only after i put the 17 on with my brother running a 14. so sure i would beat him pretty bad. that was on pavement by the way. once i hit 5th i could pull on him pretty bad. once we got a 16 on his bike he would stay with me and beat me off the line until i hit 6th in which case i had a little more on top. i wouldnt say thats fitting for a 4mm stroker engine to be that close to a woods ported 350 bike. class dismissed Quote Link to comment Share on other sites More sharing options...
joneser4u Posted December 10, 2004 Report Share Posted December 10, 2004 Go-Kart! Quote Link to comment Share on other sites More sharing options...
XxMeltIcexX Posted December 10, 2004 Report Share Posted December 10, 2004 joneser4u is another xt45 in the making.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.