BansheeMT Posted October 8, 2004 Report Share Posted October 8, 2004 Im thinking about rebuilding my banshee. Its a 91 stock besides reeds. I was wondering what route to go. I dont ride as much as i used to so i want to do it as inexpensive as possible but not cheap out on anthing. any suggestions for what to go with pipes, igniton, pistons,clutch? do i have to redo the bottom end? thanks for the help! Quote Link to comment Share on other sites More sharing options...
decon Posted October 8, 2004 Report Share Posted October 8, 2004 (edited) k&n air filter, and some pipes, most likely some fatty's. They are a real good inexpensive pipe. the only time to get a top end rebuild is if you really need it. if everything is fine then u dont have to buy anything. clutch u dont have to worry about until your puttin out some real hp's. the links below are all u need for a simple upgrade. http://alba.buyol.com/Item/banpk.htm http://alba.buyol.com/Item/PD201RC.htm if thats too much for ya, hit up ebay , or u can find some stuff for sale right here in the HQ. Edited October 8, 2004 by dEcon Quote Link to comment Share on other sites More sharing options...
BansheeMT Posted October 8, 2004 Author Report Share Posted October 8, 2004 Right on.. what about T5's? I hear that those are the best pipe for a stock shee? agree or disagree thanks for the help Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 8, 2004 Report Share Posted October 8, 2004 go with t5's they are sweet on a stock bike and even better with a ported engine. then get you a better filter set up. perhaps a noss head to help cool it down some and raise your compression. Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted October 8, 2004 Report Share Posted October 8, 2004 def a new filter, i love K&N's, and the fmf's are cheaper, but the T5's do markable things ona near stock bike. then a rebuild, hell its been that long, im surprized she still runs! Quote Link to comment Share on other sites More sharing options...
BansheeMT Posted October 8, 2004 Author Report Share Posted October 8, 2004 WHAT IS THE BEST HEAD TO GO WITH? Quote Link to comment Share on other sites More sharing options...
97BANSHEENY Posted October 8, 2004 Report Share Posted October 8, 2004 Noss head...get in touch with dlnoss on this website he can hook u up...I got it on mine..U cant go wrong! Quote Link to comment Share on other sites More sharing options...
decon Posted October 8, 2004 Report Share Posted October 8, 2004 Right on.. what about T5's? I hear that those are the best pipe for a stock shee? agree or disagree thanks for the help depends on where you ride. so, where do you ride mostly? Quote Link to comment Share on other sites More sharing options...
sredish Posted October 9, 2004 Report Share Posted October 9, 2004 what about T5's? I hear that those are the best pipe for a stock shee? There is NO BEST PIPE for the shee or any two stroke! That's the first lesson in two strokes. Figure out where and how you ride, then get back to us. Quote Link to comment Share on other sites More sharing options...
BansheeMT Posted October 9, 2004 Author Report Share Posted October 9, 2004 I ride the dunes by Las Vegas the most. Dumont is where we will go the most! I checked my compression las night and it was 105 psi, is that good? Quote Link to comment Share on other sites More sharing options...
decon Posted October 9, 2004 Report Share Posted October 9, 2004 if your lookin for a pipe to haul ass in the dunes, get the t5's. If you lookin for a pipe to cruise through the dunes, go with the fatty's. the fatty's are a real nice pipe, I would take fatty's over t5's anyday. Quote Link to comment Share on other sites More sharing options...
Banshee~ Posted October 9, 2004 Report Share Posted October 9, 2004 Get some T5's, Banshee Super Flow Airbox Kit, and a Coolhead...and you will be hauling ass Quote Link to comment Share on other sites More sharing options...
Banshee~ Posted October 9, 2004 Report Share Posted October 9, 2004 (edited) I ride the dunes by Las Vegas the most. Dumont is where we will go the most! I checked my compression las night and it was 105 psi, is that good? Heres a compression chart I took off of www.nossmachine.com Edited October 10, 2004 by Banshee~ Quote Link to comment Share on other sites More sharing options...
Toomey Banshee Posted October 9, 2004 Report Share Posted October 9, 2004 If you're gonna put on a cool head and some pipes, might as well do the top end. Throw in some Weisco pro-lite pistons, go with a noss head with 20cc domes, pro design filter plate with your choice of foam or K and N or the Toomey 2 into 1 filter, send your flywheel to boonman to get it lightned and buy an adjustable timing plate from RIcky Stator. For the dunes you cant go wrong with T-5's or CPI's. If and when I do it over again, I am gonna just go with CPI's and be done with it. Prices should be something like this 1. Piston kit 220 bux 2. bore job 120 bux (60 per jug) 3. cool head and domes 300 bux? 4. filter 100 bux 5. pipes 600 bux 6. lightned flywheel 40 bux? 7. timing plate 35 bux That total about 1400 bucks. Not too bad. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.