01bansheeke Posted October 7, 2004 Report Share Posted October 7, 2004 Anyone have any good info for me? What i need to know is how to move my needle. I need to move it up a notch to lean my shee out in the middle. Problem is, i'm not sure what i need to do to get it out and move it up. Anyone with some pics or just some good info?? Quote Link to comment Share on other sites More sharing options...
01bansheeke Posted October 7, 2004 Author Report Share Posted October 7, 2004 someone? Quote Link to comment Share on other sites More sharing options...
kenr74 Posted October 7, 2004 Report Share Posted October 7, 2004 Pull the cap off, slide the spring up, slide the cable out of the notch, remove the two screws holding in the brass retainer, pull the needle out, move the clip up. Reverse to put it back together. 5 minutes for each side max. Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted October 7, 2004 Report Share Posted October 7, 2004 Thats because your tors is removed. Takes me a little longer because it takes me for ever to get that brass clip on to hold the cable there. I cant get my dam fingers in there. Quote Link to comment Share on other sites More sharing options...
Banchetta Posted October 8, 2004 Report Share Posted October 8, 2004 Quote Link to comment Share on other sites More sharing options...
J-Madd Posted October 12, 2004 Report Share Posted October 12, 2004 BansheeHQ I don't know if this link will work, but do a search on "step by step to lift the needle" Quote Link to comment Share on other sites More sharing options...
fixitrod Posted October 12, 2004 Report Share Posted October 12, 2004 BansheeHQ I don't know if this link will work, but do a search on "step by step to lift the needle" Here's the corrected link http://www.bansheehq.com/forums/index.php?...topic=22016&hl= Quote Link to comment Share on other sites More sharing options...
J-Madd Posted October 12, 2004 Report Share Posted October 12, 2004 BansheeHQ I don't know if this link will work, but do a search on "step by step to lift the needle" Here's the corrected link http://www.bansheehq.com/forums/index.php?...topic=22016&hl= Thanks fixitrod, I apparently don't know how to paste a link. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted October 12, 2004 Report Share Posted October 12, 2004 BansheeHQ I don't know if this link will work, but do a search on "step by step to lift the needle" Here's the corrected link http://www.bansheehq.com/forums/index.php?...topic=22016&hl= Thanks fixitrod, I apparently don't know how to paste a link. You just had two http:// Quote Link to comment Share on other sites More sharing options...
01bansheeke Posted October 12, 2004 Author Report Share Posted October 12, 2004 one more question...if i moved the needle up(clip down) am i leaning out the middle or richening. Quote Link to comment Share on other sites More sharing options...
Banchetta Posted October 13, 2004 Report Share Posted October 13, 2004 one more question...if i moved the needle up(clip down) am i leaning out the middle or richening. richening Quote Link to comment Share on other sites More sharing options...
fixitrod Posted October 13, 2004 Report Share Posted October 13, 2004 one more question...if i moved the needle up(clip down) am i leaning out the middle or richening. richening Just think about how the needle is shaped and where the fuel is coming from. If you raise it, the skinnier part will open the hole (venturi) sooner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.