jjfizzle51 Posted August 21, 2004 Report Share Posted August 21, 2004 does a noss cool head give you hp or is it just for keeping stuff cool and what size domes would be the best Quote Link to comment Share on other sites More sharing options...
racer Posted August 21, 2004 Report Share Posted August 21, 2004 if you raise the compression via smaller domes you will gain torque. and if you go small enough then you can use race gas and that will make more power. PM dlnoss for a full list of advantages of the cool head setup. Quote Link to comment Share on other sites More sharing options...
dlnoss Posted August 22, 2004 Report Share Posted August 22, 2004 What is your elevation and other mods? Do you want to run pump gas or race gas? Quote Link to comment Share on other sites More sharing options...
banshdog Posted August 27, 2004 Report Share Posted August 27, 2004 Just got my NOSS head yesterday, probably put it on tonight. Wondering if I can just put it on and go, or are there adjustments to be made? Jetting? thx guys. Quote Link to comment Share on other sites More sharing options...
dlnoss Posted August 27, 2004 Report Share Posted August 27, 2004 Normally jetting requirements remain the same but it's never a bad idea to check the plugs. Let me know what you think after installation. -David Quote Link to comment Share on other sites More sharing options...
jjfizzle51 Posted August 27, 2004 Author Report Share Posted August 27, 2004 dlnoss i dont know what my elevation is but i live in utah so does that help you out any and if i do get one could i put it on or is a job with some experience thanks Quote Link to comment Share on other sites More sharing options...
sredish Posted August 27, 2004 Report Share Posted August 27, 2004 dlnoss i dont know what my elevation is but i live in utah so does that help you out any and if i do get one could i put it on or is a job with some experience thanks What town in UT, on top of a mountain, or down in the desert? They're pretty easy to put on. Just gotta get the orings to sit right and then you have to torque in a sequential pattern, but it's not bad, and much better than paying your dealer 2 or 3 bones to put it on. Quote Link to comment Share on other sites More sharing options...
banshdog Posted August 27, 2004 Report Share Posted August 27, 2004 Awhile back I bought 2 inline coolers, but only put one on. Wondering if i should put the second one one while i have the coolant lines disconnected. What do you guys think? Is it worth it, or a waste of time? Quote Link to comment Share on other sites More sharing options...
jjfizzle51 Posted August 27, 2004 Author Report Share Posted August 27, 2004 i live down in tha city in west jordan if you know where that is Quote Link to comment Share on other sites More sharing options...
banshee_kid350 Posted August 28, 2004 Report Share Posted August 28, 2004 i live down in tha city in west jordan if you know where that is hey I live in west valley a couple miles from you I just added a noss head to my bike and I have not had to mess with the jetting at all . And if you were wondering to elevation here it is about 4500feet above sea level. I got 19cc domes with my noss head also just an idea for you id you were wondering Quote Link to comment Share on other sites More sharing options...
banshdog Posted August 30, 2004 Report Share Posted August 30, 2004 Done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.