bansheeryder_69 Posted August 20, 2004 Report Share Posted August 20, 2004 My friend says you can mill a coolhead, I say you can't cause of the interchangeable domes WTF? Quote Link to comment Share on other sites More sharing options...
cam2 Posted August 20, 2004 Report Share Posted August 20, 2004 yeah why bother, just change domes? if you did mill it then you would have to recut the grooves for the o-rings and modify the domes as well in order to get the full effect. it's more of a hassle then it's worth.....cost...time......and the chance of screwing up a good after market head . not worth the hassle or cost. just buy a new set of domes. Quote Link to comment Share on other sites More sharing options...
Screamin_Banshee Posted August 20, 2004 Report Share Posted August 20, 2004 Thats why they were designed the way they are Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted August 20, 2004 Report Share Posted August 20, 2004 Oh you CAN mill it, but it would be the stupidest thing in the world to do!! Quote Link to comment Share on other sites More sharing options...
fixitrod Posted August 20, 2004 Report Share Posted August 20, 2004 And the squish wouldn't be right on the domes. You'd be buying new domes anyway. Quote Link to comment Share on other sites More sharing options...
Oilsmoke Posted August 23, 2004 Report Share Posted August 23, 2004 bansheeryder_69 Your Friend is Right you can do it But it would cost as much as buying a new head to remachine it all over agian. SO your friend is wrong also. And on a 2nd note, where were you last weekend? Me & Cotton eyed joe was up there at Egin lake for 3 days and i never got my race with you. Quote Link to comment Share on other sites More sharing options...
bansheeryder_69 Posted August 23, 2004 Author Report Share Posted August 23, 2004 I was at home wishing I had someone to ride with but my dad wouldn't let me go alone and all my riding buddies were gone and I was wasted from football. But let me know next time you come up. Quote Link to comment Share on other sites More sharing options...
sredish Posted August 23, 2004 Report Share Posted August 23, 2004 That's the most ridiculous think I've heard. You'd mill a head to increase the compression in the combustion chamber, but then that's one of the benefits of buying a coolhead, so you don't have to mill a head and get added cooling, and you'd f that all up by milling it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.