Jump to content

running bad


Recommended Posts

ever since a few weeks ago my banshee hasnt been runnin good at all it wants to bog down really bad. it seems like it does it more when im going at a constant speed. when i get in higher rpms it seems to do fine untill i start going a constant speed again. its hard to explain but any help at all would be highly appreciated thanks

Link to comment
Share on other sites

probably cause your letting out the throttle to a "constant speed" and your jetting in that throttle area is a little off. has the weather changed recently? like colder or hotter? colder would lean it out some and and hotter would richen it some. i'm betting that you might need to adjust the clip on your needle.

 

is it flat bogging or is it sputtering at all?

Link to comment
Share on other sites

i checked the parking brake and the tors and put new plugs in and im still having the problem any other ideas. it does it in every gear and in neutral if that helps any. im very new to banshees and i guess any thing to do with motors i do know some stuff but not too much. i dont think its my jetting because it just statred out of no where, but again i dont know to much. thanks a lot for the help.

Link to comment
Share on other sites

  • 4 weeks later...

i would check your air filter. if that isn't it measure the resitance in your spark plug caps, if they are the same you should be fine there" sorry don't feel like lookin the resistance up" make sure your fuel is flowing and your floats are set and working properly. other than that there isn't may things that would cause this.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...