beatmiester Posted August 7, 2004 Report Share Posted August 7, 2004 I was on the fence about buying a temperature gauge or using the mod from a link on this forum http://www.dunereview.com/mods.htm so I figured what the heck I would try it first thing I did is I didn't want to cut the factory hose so instead of using the 3/8 hose that it tells you to use I used 5/16 fuel line this seams to fit the head a little better I changed the hose from the head so if it leaked I could swap it back use all 5/16 fuel line and 1/8 vacuum hose and 6 clamps and 5/16 Tee fitting and go to Wal-Mart and buy the meat temp gauge for about 6 dollars I'm so happy I did this it looks great it doesn't leak and works like a charm thanks for all the help from great people like " wyoduner " this is a lot better than the gauge you buy for 35.00 save your money and do it this way it looks more custom anyway by the way it took about 40 minutes to install Quote Link to comment Share on other sites More sharing options...
J.J. Posted August 7, 2004 Report Share Posted August 7, 2004 This is indeed a very popular mod, I also have it done and it works great. I started off with a cooking thermometer, but mine only lasted about 2 rides before the needle fell off. After that I purchased an industrial quality glycerin filled dial thermometer and it's been working great. You have to ensure that the tip of the thermometer is as close to the T-piece as possible to get quick and accurate readings. Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted August 7, 2004 Report Share Posted August 7, 2004 (edited) ive done it to, works great and covers up the old hole on the plastic where someone put a key, def a mod more people should do Edited August 7, 2004 by frocashmoney24 Quote Link to comment Share on other sites More sharing options...
sredish Posted August 7, 2004 Report Share Posted August 7, 2004 ive dont it to, works great and covers up the old hole on the plastic where someone put a key, def a mod more people should do I've just been too lazy. Honestly! Quote Link to comment Share on other sites More sharing options...
J.J. Posted August 7, 2004 Report Share Posted August 7, 2004 I've just been too lazy. Honestly! I bet you've just been waiting for an oppertunity to use that emoticon Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted August 7, 2004 Report Share Posted August 7, 2004 scott, you lazy ass, what if i make you one and send it to you Quote Link to comment Share on other sites More sharing options...
Oilsmoke Posted August 7, 2004 Report Share Posted August 7, 2004 (edited) I done this too. cost was like under ten dollars. The walmart meat gauage has worked well form me. 6 outings so far and still tickin . Edited August 7, 2004 by Oilsmoke Quote Link to comment Share on other sites More sharing options...
fixitrod Posted August 8, 2004 Report Share Posted August 8, 2004 I done one a couple years ago. Still works great. Quote Link to comment Share on other sites More sharing options...
bansheewidow Posted August 8, 2004 Report Share Posted August 8, 2004 I went out and got a mechanical automotive gauge that fit stock return hose. Just a bigger copper fitting for about the same price and mounted it on fender behind headlight. Quote Link to comment Share on other sites More sharing options...
DUNEDEMON Posted August 9, 2004 Report Share Posted August 9, 2004 I was too laze to make one so I just bought and installed a "heatseeker" Quote Link to comment Share on other sites More sharing options...
bansheewidow Posted August 10, 2004 Report Share Posted August 10, 2004 my brother in law has one like that and I like the automotive gauge better easier to see it is about 1 1/4" on fender by left knee try it. Quote Link to comment Share on other sites More sharing options...
sredish Posted August 10, 2004 Report Share Posted August 10, 2004 I was thinkin of tryin out a heatseeker. Maybe I will. Quote Link to comment Share on other sites More sharing options...
beatmiester Posted August 10, 2004 Author Report Share Posted August 10, 2004 the heatseeker looks like the same thing with a long needle and it comes out the vent on the side of the tank just try this what do you have to lose if you do it like i did you can always put back the org hose Quote Link to comment Share on other sites More sharing options...
Oilsmoke Posted August 10, 2004 Report Share Posted August 10, 2004 That Heetseeker Looks just like a 5 dollar wallmart special. How much do they cost anyways? Quote Link to comment Share on other sites More sharing options...
DUNEDEMON Posted August 11, 2004 Report Share Posted August 11, 2004 That Heetseeker Looks just like a 5 dollar wallmart special. How much do they cost anyways? I think they're $25 or $30, quick install, works well. I'm happy with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.