bakedmonkey Posted August 5, 2004 Report Share Posted August 5, 2004 Boyesen rad valves any buddy run these and if so what do you think. i just ordered a pair and just wondering what to expect i also ordered some fmf fattys with power core2 silencers Quote Link to comment Share on other sites More sharing options...
sheefreak Posted August 5, 2004 Report Share Posted August 5, 2004 You'll love the fattys, but not sure about the rad valve. Quote Link to comment Share on other sites More sharing options...
wv banshee Posted August 17, 2004 Report Share Posted August 17, 2004 send your rad vales back they make you loose around 2 hp lol i got set on my shee only because i sold my v force to customer who didnot want to wait but i love runnign fattys on all bansee i build do u also get jet kit to match if not i recmend geting a k&n power kit and run the 280 jet it sould be close to what you want hope this helps u later drew Quote Link to comment Share on other sites More sharing options...
superchicken Posted August 17, 2004 Report Share Posted August 17, 2004 i run fattys and rad valves but i have the ported to an inch of there lives.when my she was mostly stock it had very snappy throttle response but i had to perfect my jetting with alot of trial and error.i still use them with all my other mods i added.maybe some day ill get vforces when im rich and famous.my shee with just pipes,rad valves,air box lid off,at sea level i ran a 300 main.depending on your elevation it might be a good place to start on the main size. Quote Link to comment Share on other sites More sharing options...
excalibur Posted August 20, 2004 Report Share Posted August 20, 2004 took the v force out of my banshee. they made my savings go fast but not my banshee. Quote Link to comment Share on other sites More sharing options...
bakedmonkey Posted August 23, 2004 Author Report Share Posted August 23, 2004 well it is all together now i have kn filter in box fmf fattys fmf power core silencers rad valves and jetted 280 i also put on some mudlite tires wich were a bit bigger... i will say it hauls ass now and it will do untill i have money to do a stroker kit........ ( see not bad for a dumb CANADIAN) Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted August 23, 2004 Report Share Posted August 23, 2004 I got Rad Valves and I like them. Quote Link to comment Share on other sites More sharing options...
Klotzban1 Posted September 5, 2004 Report Share Posted September 5, 2004 Great choice on the Fatties and the powercore 2's!!! I run that setup too and I love the torque and pull my Shee has. I know with a great tire for grip its gonna be a beast. My 26mm carbs are jetted 260 and had no problems. They are right ..wd40 is a good deal for protecting your pipes. When they dull from no polishing for a while I use never dull to bring out the shine to my pipes and finish the cleanup with a light coat of the wd40. Quote Link to comment Share on other sites More sharing options...
MotulMonsta Posted September 5, 2004 Report Share Posted September 5, 2004 You wasted your money on the RAD valves. Stock cages flow better then they do. Quote Link to comment Share on other sites More sharing options...
John19 Posted September 7, 2004 Report Share Posted September 7, 2004 You wasted your money on the RAD valves. Stock cages flow better then they do. werd Quote Link to comment Share on other sites More sharing options...
PolyKarbon Posted September 7, 2004 Report Share Posted September 7, 2004 I took out my v forces and put in the rad valve. I like the rad valve MUCH better. I also run fattys and power cores. Quote Link to comment Share on other sites More sharing options...
bakedmonkey Posted September 8, 2004 Author Report Share Posted September 8, 2004 I dont know why people dont like these my riddinf budy runs a 2001 shee and he has the toomet t6 pipes and delta reeds with reed spacer and a cone filter i run a bored 30 tho over 94 shee with fatty pipes and power core silencers and rad valves with a cone filter when we race i beat him no problem even if i have a bad start i still beat him i am more than happy with them Quote Link to comment Share on other sites More sharing options...
bakedmonkey Posted September 8, 2004 Author Report Share Posted September 8, 2004 I dont know why people dont like these my riddinf budy runs a 2001 shee and he has the toomet t6 pipes and delta reeds with reed spacer and a cone filter i run a bored 30 tho over 94 shee with fatty pipes and power core silencers and rad valves with a cone filter when we race i beat him no problem even if i have a bad start i still beat him i am more than happy with them Quote Link to comment Share on other sites More sharing options...
pimpeinkc Posted September 17, 2004 Report Share Posted September 17, 2004 just don't forget to rejet, you gona need it Quote Link to comment Share on other sites More sharing options...
Bansheerider29x Posted September 21, 2004 Report Share Posted September 21, 2004 i run boysen rad valves with my fmf gold series fatty pipes and powercore2 silencers and they run great together so whats the big deal Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.