bansheeryder_69 Posted August 2, 2004 Report Share Posted August 2, 2004 I was wondering if there are any tips that ae REALLY easy and cheap that help out your shee a lot. For example Jetting and things like that. Quote Link to comment Share on other sites More sharing options...
ranshee Posted August 2, 2004 Report Share Posted August 2, 2004 How cheap is cheap? For somewhere around 100 bucks you can mill your head. Thats kinda cheap. Quote Link to comment Share on other sites More sharing options...
fmfsst29 Posted August 2, 2004 Report Share Posted August 2, 2004 does milled your head add lowend Quote Link to comment Share on other sites More sharing options...
sredish Posted August 2, 2004 Report Share Posted August 2, 2004 (edited) milling your head increases cylinder compression which increases performace all over the board, it's a fairly cheap mod. Also, you can mod your timing plate to advance it 4 degrees which will also help power all over the board. A high flow K&N will help, but I wouldn't put any money into air filters unless you get a ProDesign Pro Flow plate, the stocker can potentially suck dirt. There's really not too much more for super cheap power. You could get a set of pipes off of ebay pretty cheap and that will give you way way more power than the above mods combined honestly. The only time rejetting is really necessary is when you change something that will affect the air/fuel ratio. Milling head won't need it, timing may or may not, and a high flow filter will need it. Edited August 2, 2004 by sredish Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted August 2, 2004 Report Share Posted August 2, 2004 like they said, how cheap is cheap, for 400 bucks, you can get quite a bit of mods to wake your banshee' up and make it a whole new quad Quote Link to comment Share on other sites More sharing options...
fmfsst29 Posted August 2, 2004 Report Share Posted August 2, 2004 yea i have t-6 i wanet to milled my head but what .30 or .35 with a vitos +4 degree key and a lighten fly wheel how much do you think these three thing would caust or to be done to Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted August 2, 2004 Report Share Posted August 2, 2004 Boonman does the heads and flywheels give him a pm for a price.He does great work,and his turn around time is fast. Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted August 2, 2004 Report Share Posted August 2, 2004 pm boonman about the head milling and the flywheel lightening, he does both, the key you can get for 20 bucks from www.vitosperformance.com Quote Link to comment Share on other sites More sharing options...
Wassup350 Posted August 2, 2004 Report Share Posted August 2, 2004 Taking the snorkel off the air box lid is cheap. Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted August 2, 2004 Report Share Posted August 2, 2004 damn, u musta just beat me to it sick Quote Link to comment Share on other sites More sharing options...
sredish Posted August 2, 2004 Report Share Posted August 2, 2004 (edited) i will also vouch for boonman on milling heads and lightening flywheels. he's a stand-up guy, well unless he's been drinking and then needs to lie down, and gets things back to you very quickly, like the day after he receives them. Later. Edited August 2, 2004 by sredish Quote Link to comment Share on other sites More sharing options...
FastASSBANSHEE70 Posted August 4, 2004 Report Share Posted August 4, 2004 I got some DMC916's on ebay for $270 . My Banshee Pulls like a Fu%!in truck now I can't believe the diffrence . And the DMC916's sound SWEET!!! Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted August 4, 2004 Report Share Posted August 4, 2004 Boon did mine, got it in a week, great guy and great job Quote Link to comment Share on other sites More sharing options...
MRMOONEY Posted August 4, 2004 Report Share Posted August 4, 2004 IVE GOT SOME CHEAP FMF PIPES FOR SELL LET THEM GO FOR 75 SHIPPED JUST NEED SOME SLINCERS FOR THEM, BIG POWER THERE Quote Link to comment Share on other sites More sharing options...
fixitrod Posted August 5, 2004 Report Share Posted August 5, 2004 IVE GOT SOME CHEAP FMF PIPES FOR SELL LET THEM GO FOR 75 SHIPPED JUST NEED SOME SLINCERS FOR THEM, BIG POWER THERE You can't beat that. You can make the stock silencers work with them too. BenBB had to do that for a while. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.