BluBanshee98 Posted August 1, 2004 Report Share Posted August 1, 2004 Any good tricks to getting the shine back on my plastics? I used 12000 grit sand paper and got all of the scratches out, and got them nice and smooth. But no shine. Any good polish that works? Quote Link to comment Share on other sites More sharing options...
fmfsst29 Posted August 1, 2004 Report Share Posted August 1, 2004 (edited) compound and a buffin wheel then wax then im a detailer works every time..but you should have use 1500 and wet sanded....make sure you get ccompoud for 1200 grit scratchs..there different levels Edited August 1, 2004 by fmfsst29 Quote Link to comment Share on other sites More sharing options...
stealthawd Posted August 1, 2004 Report Share Posted August 1, 2004 you can flame the plastics, that will put a nice shiny finish to them and "close" all of the scratches you put in when you fine sanded. it's LLDPE (Linear Low Density Polyethylene) so it's pretty soft, it's not like paint, I don't think wet sanding will do a whole lot like it will with paint. if you try to buff it, it will more than likely melt as it's melting point isnt that high so you will end up with weird grooves and swirls from the buffer. once again, it's not like paint. paint will and can burn very easily, but it has a higher "melt point" than LLDPE. LLDPE melts VERY easy with friction as opposed to flaming the surface. take a piece and rub it on a low pile carpet and you'll see what I mean, it will "grind away" pretty quick. when you flame the plastics, you use a very large tip on your torch (at least 1" - 1.5" Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted August 1, 2004 Report Share Posted August 1, 2004 mop n glow brotha!! Quote Link to comment Share on other sites More sharing options...
BansheeBrian Posted August 1, 2004 Report Share Posted August 1, 2004 Simplegreen then pinesol works here. Quote Link to comment Share on other sites More sharing options...
sheescreams Posted August 9, 2004 Report Share Posted August 9, 2004 Armor All Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.