theeechozen1 Posted July 24, 2004 Report Share Posted July 24, 2004 My bikes idle is way too high after putting the carbs and intakes back together, When I look at one of the needles when the throttle is open it's a little off to the side and the other carb is dead on strait. Looking at the needle with the slide pulled out it looks strait as a grizzlys dick. the little brass piece that holds the slide in place looks good too....I've been staring at the damn thing for an hour and can't figure out why it pulls out to the side??? Maybe I drank too much last night any ideas? Thanx Quote Link to comment Share on other sites More sharing options...
streetshee Posted July 24, 2004 Report Share Posted July 24, 2004 maybe your carb is not exactly straight on the intake? (vertically i mean) Quote Link to comment Share on other sites More sharing options...
sredish Posted July 24, 2004 Report Share Posted July 24, 2004 maybe we need to see a pic to help you, i'm a little confused. maybe i drank too much. Quote Link to comment Share on other sites More sharing options...
theeechozen1 Posted July 24, 2004 Author Report Share Posted July 24, 2004 No diggy cam, so that sucks...picture this, looking into the carbs while they are on the bike with the filters off, open the throttle all the way, when I look at the tip of the needles (the carb on the left) is not strait or in the middle of the jet, it's closer to one side of the main jet. The other carb is perfect. would this mean my needle is bent? cause it doesnt look bent when I take the slide out and look at it. I am about done fooking with this thing today. Time to start drinkin again Quote Link to comment Share on other sites More sharing options...
sredish Posted July 24, 2004 Report Share Posted July 24, 2004 maybe your carb is not exactly straight on the intake? (vertically i mean) that's probably the thing to look at first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.