jiffy Posted July 22, 2004 Report Share Posted July 22, 2004 I have never really jetted before I started to mess with it once but just ended up bringing it ti the shop. I need a starting point. I Have 34mm mukuni carbs clamp on k&n with outerwears, 421cc Cheetah monoblock, pump gas, paul turner mid range pipes, and I live in michigan. I would like to save some money and do this myself but it seems tricky, any help would be useful. Jeff Quote Link to comment Share on other sites More sharing options...
sredish Posted July 22, 2004 Report Share Posted July 22, 2004 The BansheeHQ Jetting FAQ is a good place. Get a baseline figure (not from me, my knowledge does not extend to cheetahs and 34 mikunis). Then get your main dialed in first, using a WOT run in 5th or 6th gear. Once and only once your main is set, then get your needle somewhere you like. Then, dial in the pilot for good idle and response. After adjusting the idle, you may or may not have to tweak the needle again. Later. Quote Link to comment Share on other sites More sharing options...
racer Posted July 22, 2004 Report Share Posted July 22, 2004 how do you have that kind of motor and never jetted anything before? i hope thats not what you picked for your first banshee cause that lil fugger is FAST. Quote Link to comment Share on other sites More sharing options...
Maverick302 Posted July 23, 2004 Report Share Posted July 23, 2004 well therail pretty much said exactly what i would have said so good luck Quote Link to comment Share on other sites More sharing options...
Banchetta Posted July 25, 2004 Report Share Posted July 25, 2004 I have never really jetted before I started to mess with it once but just ended up bringing it ti the shop. I need a starting point. I Have 34mm mukuni carbs clamp on k&n with outerwears, 421cc Cheetah monoblock, pump gas, paul turner mid range pipes, and I live in michigan. I would like to save some money and do this myself but it seems tricky, any help would be useful. Jeff I'd start w/ a 185 or larger mains. 58 pilots and go from there...Thats what I run in mine w/ PTR mids and a 4 mil stroker... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.