PlaynSand Posted July 18, 2004 Report Share Posted July 18, 2004 Where can I get some pipe clamps for these Rocket pipes? The pipe size is 1 1/4 on stinger tube and 1 1/8 on pipe outlet and overall length would be about 1 1/2 . Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted July 18, 2004 Report Share Posted July 18, 2004 go to www.jlatvproducts.com they have them for sale in there with the size of the clamp. there made by cascade and look blingin to! Quote Link to comment Share on other sites More sharing options...
sredish Posted July 18, 2004 Report Share Posted July 18, 2004 and look blingin to! it's all about the bling. Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted July 18, 2004 Report Share Posted July 18, 2004 You can also PM Minkia38 on here,because he is a Rocket Pipes dealer. Quote Link to comment Share on other sites More sharing options...
FadedDreams Posted July 18, 2004 Report Share Posted July 18, 2004 I don't even use clamps for mine,they slip together and fit tight.Not a problem at all. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted July 18, 2004 Report Share Posted July 18, 2004 i used stock ones. they fit great. they dont look all that pretty, but they work. Quote Link to comment Share on other sites More sharing options...
Minkia38 Posted July 19, 2004 Report Share Posted July 19, 2004 I do not run them either, but I'm in the proocess of finding out if I can get a whole lot made and sell cheap to Rocket owners! Quote Link to comment Share on other sites More sharing options...
Ducman Posted July 20, 2004 Report Share Posted July 20, 2004 I got the cascades for my Rockets from my local stealer (like $65, I was loured in by the bling like a trout to a super dupper) and they look sweet but they did change the spacing on the silenger tube to pipe fitment; it made the total length of the stingers too long. The silencer tube will only go so far into the seals and the end that goes over the expansion chamber stinger will only slide on untill it comes up against the welds of the expansion chamber. I had to trim approx. 3/8" off the silencer stinger tube and now it fits perfect, seals great and is tres tres bling bling! It gives the pipes a really stout and clean look. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.