spoolnvr4 Posted July 12, 2004 Report Share Posted July 12, 2004 I have a 99 Banshee all stock except for T6 pipe kit, and 2:1 air filter... no air box... 280 main... it also came with a 270 main...and the needle jet supplied by Toomey... my air mixture screw is out 2 turns... im mixing at 36:1 fuel... when i start it, it is alittle smokey, but goes away after a while... after some beating around my yard with it... i took the plugs out and they were alittle damp. i noticed when the bike is warm... i have to give it alittle gas to start it, which i hadnt before... Top end wise it screams, it wants to just keep on pulling in every gear... Down low... it bogged alittle, i was running paddles, maybe i am jsut used to the limited traction of the stock tires...? Ill probally pull the plugs tonight and take alook at them... any suggestions... Quote Link to comment Share on other sites More sharing options...
sredish Posted July 12, 2004 Report Share Posted July 12, 2004 I'd put the stock needle back in and try it in the 4th clip. what are you running for a pilot, stock? Quote Link to comment Share on other sites More sharing options...
spoolnvr4 Posted July 12, 2004 Author Report Share Posted July 12, 2004 I only changed the main... and the Needle... both are from Toomeys Perfect jet kit... I might be jsut gettig picky with this jettign though... i definitly cant see it picking up any more power up top... it is jsut crazy... Quote Link to comment Share on other sites More sharing options...
sredish Posted July 12, 2004 Report Share Posted July 12, 2004 I only changed the main... and the Needle... both are from Toomeys Perfect jet kit... I might be jsut gettig picky with this jettign though... i definitly cant see it picking up any more power up top... it is jsut crazy... just try changing the needle, I see a lot of people complain about the low / mid and it seemed a lot of cases are attributed to the "Toomey" (aka Blaster) needle. I was informed awhile back that the "Toomey" needle is really just a Blaster needle. Quote Link to comment Share on other sites More sharing options...
JKJK Posted July 13, 2004 Report Share Posted July 13, 2004 try dropping the clip one notch change nothing else+try it.whats your elev+temp?do a WOT plug chop for a accurate reading.it will get even crazyer once you really dial it in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.