HangingTough Posted July 9, 2004 Report Share Posted July 9, 2004 How do these inline super coolers work? And where do they go? Do you just cut a line and then clamp it in or what? Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted July 9, 2004 Report Share Posted July 9, 2004 they just get cold air to the fluid, they go in either of the radiator lines in the center. just cut out a section of it, put em in, and clamp em, shit they even come with clamps, simple and well worth it Quote Link to comment Share on other sites More sharing options...
loganskinner Posted July 11, 2004 Report Share Posted July 11, 2004 definately worth the money. mine is right in the middle of the line where it comes out from the radiator, almost between the pipes, but it has lowered the operating temperature a lot. no more over heating!!! Quote Link to comment Share on other sites More sharing options...
HangingTough Posted July 11, 2004 Author Report Share Posted July 11, 2004 Thanks guys, it is a 20 fin so I hope it works Quote Link to comment Share on other sites More sharing options...
jadaven Posted July 11, 2004 Report Share Posted July 11, 2004 I have 2 on mine one on the in hose, one on the out. Takes about 5 min. Be sure to clamp off the hose so you dont spill the coolant. Quote Link to comment Share on other sites More sharing options...
racer714 Posted July 19, 2004 Report Share Posted July 19, 2004 how do you clamp off the lines to avoid spilling fluid allover the place when you install these?thanks Quote Link to comment Share on other sites More sharing options...
Kg8 Posted July 23, 2004 Report Share Posted July 23, 2004 I take vice grips and clamp on the hoses. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.