banshee04le Posted June 29, 2004 Report Share Posted June 29, 2004 (edited) Has anyone heard of Ritter Cycle Racing? I'm having some port work done there. Its about 35 minutes from my house. Dudes name is Rick Ritter. Supposedly been around a long time. I met him and checked out his shop and its tight. We talked for about an hour while he kept wrenchin away. Nice guy. What scared me a little though is that he said that the girl who does the porting will start on them first thing in the morning...which is cool, girls are supposedly better with their hands at delicate crafts. But I asked about her, and Rick said he can do the porting and used to do it all but that she has been with him about one and a half years. He says she is an artist who lives in his town and that he met her when she carved some...carved something for him, I don't know...I didn't see it. I asked if she new anything about port mapping or a degree wheel and he said no, he has just kind of shown her, or shows her what needs to be removed and she goes to town . I asked him if my transfers would get much attention and he said not a whole lot, just a little clean up (going for full port, leaning toward drag). He said the exhaust port would be altered and the intakes opened up, but not as much as a lot of guys do. He showed me a lot of work there in the shop and it is some pretty work, but I want someone with a degree wheel and a calculator on the job. Long story short just wondering what you guys think and if anyone has heard of them. Heres their website Ritter Cycle Edited June 29, 2004 by banshee04le Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted June 29, 2004 Report Share Posted June 29, 2004 dude you are screwed. maybe those little flowery designs shes gonna put in there will help the air anf fuel flow faster. Quote Link to comment Share on other sites More sharing options...
J..J. Posted June 29, 2004 Report Share Posted June 29, 2004 Can see why you're concerned, I'd also prefer someone with a calculator and degree wheel to cut my cylinders up... I suppose if it performs as promised after the job is done, then there shouldn't be much too complain about. Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted June 29, 2004 Report Share Posted June 29, 2004 eh.....I had someone port my jugs with out a degree wheel, but they build dragster engines for a living. They know what they are doing, and they knew I wanted a clean up. Both sides are the same and its a pretty damn good port job. I noticed a difference the first time I brought the front end up and damn near went verticle in the sand. I wouldn't suggest you do the same with someone that doesn't know what the difference between a pine cone and a piston is. Is she hot? Quote Link to comment Share on other sites More sharing options...
banshee04le Posted June 29, 2004 Author Report Share Posted June 29, 2004 I don't know, never seen her. We'll pretend that she is...and she ports naked . Quote Link to comment Share on other sites More sharing options...
QuadMX Posted June 29, 2004 Report Share Posted June 29, 2004 Hot AND naked? I'd send her my um...pistons and crank? Ah hell I got nothin Quote Link to comment Share on other sites More sharing options...
evil Posted June 29, 2004 Report Share Posted June 29, 2004 just hope shes not having a "visit from aunt flo" and really pissed off, and desides to take it out on your motor serious, you never know this chick might do one hell of a job and make your motor run like a bat out of hell so anyway, is she hot ? Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted June 29, 2004 Report Share Posted June 29, 2004 I don't know, never seen her. We'll pretend that she is...and she portsnaked . mmmmmmmmmmmmmm naked port job Quote Link to comment Share on other sites More sharing options...
Hockey390 Posted June 29, 2004 Report Share Posted June 29, 2004 she ports your engine and lets you watch her do it and shes naked? and she lets you do whatever you want while she is taking breaks? damn...i gotta find a female porter so i can "port"her yaaaaaa.....im retarded... Quote Link to comment Share on other sites More sharing options...
FireHead Posted July 1, 2004 Report Share Posted July 1, 2004 THe whole porting with out a degree wheel and a proper flow model for the engine would bother me. As far as the naked porting goes...............I bring nothing to the table. Quote Link to comment Share on other sites More sharing options...
racer Posted July 1, 2004 Report Share Posted July 1, 2004 mmmmmmmmmmmm naked (porting) Quote Link to comment Share on other sites More sharing options...
banshee04le Posted July 1, 2004 Author Report Share Posted July 1, 2004 Hot AND naked? I'd send her my um...pistons and crank? Ah hell I got nothin LMAO Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.