FoxBansheeRacing Posted May 23, 2004 Report Share Posted May 23, 2004 I went to a riding party today with the Shee andh theres this guy there with a STOCK Predator, and he comes over and says, nice bike you got there, I raced a guy who had $11,000 into his banshee motor and beat him by 100yds. Then his friend comes over and says, you telling him about you beating the kid with 14,000 into his motor?? He says yeah, then he goes on to tell me that my gear ratios and rpm range would not allow me to beat him. Of course the whole time he is talking shit his predator is strapped to the bed of his truck. I was so pissed I was beat red in the face, and about to lay into the stupid fucker, but I held myself back. Just needed to vent... BTW, I would like to know, is it even possible to put $11,000 in aftermarket parts into the motor?? Quote Link to comment Share on other sites More sharing options...
banshee04le Posted May 23, 2004 Report Share Posted May 23, 2004 Just into the engine? Maybe if it was built under government cotract. Quote Link to comment Share on other sites More sharing options...
CombatTalon2 Posted May 23, 2004 Report Share Posted May 23, 2004 yep, the Govt might spend 10,000 on a Motor!!! after all we have hundered dollar bolts, and 1,000 dollar ladders! Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted May 23, 2004 Report Share Posted May 23, 2004 That guy sounds like a moron. You should have asked him where he rides. Or better yet, ask his friend where he rides. You'd probably get 2 different answers there too. Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted May 23, 2004 Report Share Posted May 23, 2004 yep, the Govt might spend 10,000 on a Motor!!! after all we have hundered dollar bolts, and 1,000 dollar ladders! Were building some egressladders for the USAF that cost a lot more than that. Most of it is to cover the 12 months of paper work chasing we have done Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted May 23, 2004 Report Share Posted May 23, 2004 i hate everyone!! no jk. i just get irritated by a lot of quad owners talking shit. they need to either prove it or get out the fuckin way!! Quote Link to comment Share on other sites More sharing options...
CombatTalon2 Posted May 23, 2004 Report Share Posted May 23, 2004 yep, the Govt might spend 10,000 on a Motor!!! after all we have hundered dollar bolts, and 1,000 dollar ladders! Were building some egressladders for the USAF that cost a lot more than that. Most of it is to cover the 12 months of paper work chasing we have done Egress ladders for what? buildings? Quote Link to comment Share on other sites More sharing options...
H300F Posted May 23, 2004 Report Share Posted May 23, 2004 why didnt you say go unload it and we will get everyone to watch and ill smoke you with 1000 in mine?? Quote Link to comment Share on other sites More sharing options...
FoxBansheeRacing Posted May 23, 2004 Author Report Share Posted May 23, 2004 I did, and he said he had to leave, but didnt end up leaving for another half an hour. Quote Link to comment Share on other sites More sharing options...
hamuel Posted May 23, 2004 Report Share Posted May 23, 2004 Alot of people include the purchess price of the bike in what they ggot into it. And Yah can spend 13.5k on Billet Cylinder +14mm Triple stroker on Alcohol. but that's a louie motor(he makes redlines, cascades, and a few other places motor's) Quote Link to comment Share on other sites More sharing options...
NYUK Posted May 23, 2004 Report Share Posted May 23, 2004 it is definitly possible to put 10k into a motor,but if i had 10 k into my motor,i would get beat by very few other bikes and definitly without a doubt,no preditor would have a prayer.add this up. cheetah monoblock 10 or 14 mm drag porting, straight cut gears, cryo treated override trans case matched porting lock up clutch case trenching 10 or 14mm crank rk tech cheetah head custom cut domes 38 to 40 mm carbs converted to alky. polish or chrome everything,plus all the lil odds and ends you need to get it running. Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted May 23, 2004 Report Share Posted May 23, 2004 thats the way to do it, if ur gonna do it, do it big, and yea theres jackass's that say that a mojave can beat a alky shee, but common folks in reality we know what really happens Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted May 23, 2004 Report Share Posted May 23, 2004 i think one of those wild tripples with billet blocks would be the best bet at 14k Quote Link to comment Share on other sites More sharing options...
Ahamay04 Posted June 21, 2004 Report Share Posted June 21, 2004 I work in Aviation Life Support for the Marines, and I've helped myself to plenty of cadium-plated hardware for the shee. It's probably the most valuable ATV in the county that's still stock. Gotta love the Government. Quote Link to comment Share on other sites More sharing options...
kenr74 Posted June 21, 2004 Report Share Posted June 21, 2004 He says yeah, then he goes on to tell me that my gear ratios and rpm range would not allow me to beat him. That's when you say put up or shut up. I've raced a few Predators at the dunes and after the first 50 feet they are just eating sand. If I dropped that kind of $$ into a turd on wheels I'd probably talk shit too though to try and save some face. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.