Fireman-hott Posted May 15, 2004 Report Share Posted May 15, 2004 Quick question. On the stock headlights, which wire runs the lowbeam the orange or green one? Second is the banshee a 12v dc current? Would it run a cluster of led lights. Quote Link to comment Share on other sites More sharing options...
cdcoxwell Posted May 17, 2004 Report Share Posted May 17, 2004 Mine is an 87' and the clymer manual states to check the lights 1. Turn the dimmer switch to the LO position. 2. Use an ohmmeter set at R x 1 and connect the 2 ohmmeter leads first to the yellow and blue wires. 3. Then to the blue and green wires. If the switch is good, there will be continuity (very low resistance). Quote Link to comment Share on other sites More sharing options...
jrm312 Posted May 17, 2004 Report Share Posted May 17, 2004 the yellow is the high beam , at least is was on mine Quote Link to comment Share on other sites More sharing options...
dnhyoung Posted May 17, 2004 Report Share Posted May 17, 2004 I've got an '01, and the green is low, yellow is high, and black is ground Quote Link to comment Share on other sites More sharing options...
Sin Posted May 17, 2004 Report Share Posted May 17, 2004 ohm em out man...best way to be sure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.