Nighty Posted May 10, 2004 Report Share Posted May 10, 2004 Eventually every blue banshee out there will start to develop white marks from sagging or rolling the banshee. Is there a way to get the white marks out? Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted May 10, 2004 Report Share Posted May 10, 2004 heat gun, or some new plastics, or repainting Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted May 10, 2004 Report Share Posted May 10, 2004 use a propane torch and lightly go over the white marks. dont get too close. start far away and work with it until you get good at it. it will take most of the white out. DO NOT use an actylene torch. it will melt your plastic. Quote Link to comment Share on other sites More sharing options...
pimp559 Posted May 10, 2004 Report Share Posted May 10, 2004 You can also use the wifes hair dryer. Its a little more forgiving than a torch incase you get too close. Quote Link to comment Share on other sites More sharing options...
Nighty Posted May 10, 2004 Author Report Share Posted May 10, 2004 Thanks guys! We have a paint burner (kinda like an advanced hair dryer), Ill try that. So the fenders will turn blue again if you heat them up? Ps: did a cam modification tonight on a yfz450.. i cannot believe how good those things run.. really beserk.. i want one. oh the cam mod was hmm not to impressive might change with yetting. Quote Link to comment Share on other sites More sharing options...
sredish Posted May 10, 2004 Report Share Posted May 10, 2004 the cam mod was hmm not to impressive might change with yetting. i don't know how well that will help, you probably should just start with the jetting. such a smartass. Quote Link to comment Share on other sites More sharing options...
Nighty Posted May 10, 2004 Author Report Share Posted May 10, 2004 Hehehe i should come over, to run you over, with that nice jeep in your sig No hard feelings have a beer Quote Link to comment Share on other sites More sharing options...
tenn banshee Posted May 11, 2004 Report Share Posted May 11, 2004 a heat gun will take some of the stress marks out, just dont hold it in one place too long. Quote Link to comment Share on other sites More sharing options...
evil Posted May 13, 2004 Report Share Posted May 13, 2004 just cut your fenders so you dont get those stress marks ohh and the heat trick works a few times, then if it happens again the blue wont come back as easy. Quote Link to comment Share on other sites More sharing options...
Nighty Posted May 13, 2004 Author Report Share Posted May 13, 2004 All stress marks gone! That heat trick works great! Thanks Quote Link to comment Share on other sites More sharing options...
Nighty Posted May 13, 2004 Author Report Share Posted May 13, 2004 ohyeah and the rejetted yfz450 now really REALLY does whoop ass. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.