BANSHEEK Posted May 8, 2004 Report Share Posted May 8, 2004 seems like ever mag i read has a different winner ever time they line em up whats up with this,on dirtwheels i should be smoking some folks pred,ds, on my raptor,yea yea i like to have a thumper im the barn too,well thats BS,my raptor PISSES all over it self ever time a ds drives by,i gotta blow in her ear just to get her to fire back up,whats up sheek Quote Link to comment Share on other sites More sharing options...
U8RSAND-Az Posted May 8, 2004 Report Share Posted May 8, 2004 Have you done anything to it yet? On my wifes 2002 we put the C.T. Racing kit on it. You Know pipes, muffler, jets, needles and the Pro Flow K&N filter set up without the air box lid. Then we dropped the gearing and it will run with the mild shees. Hell we took it to Glamis and I could'nt drag race it, all it would do is wheelies, so we put a 4" lonestar swing arm on it to calm it down. Quote Link to comment Share on other sites More sharing options...
Wassup350 Posted May 8, 2004 Report Share Posted May 8, 2004 (edited) Overall the Raptor is a better quad. But the DS 650 has the best top end speed, for a stock quad. Edited May 8, 2004 by Wassup350 Quote Link to comment Share on other sites More sharing options...
BANSHEEK Posted May 8, 2004 Author Report Share Posted May 8, 2004 yea got a yoshi ex k&n and up the main to 150,155 picks up good off the bottom but runs kinda flat on top,all i did was change the main jets think i need a jet kit Quote Link to comment Share on other sites More sharing options...
U8RSAND-Az Posted May 8, 2004 Report Share Posted May 8, 2004 The CT Racing kit came with new Titanium needles. Try to get those and see how they work. Yoshi pipe should be good, is it the full system? Air box lid? Quote Link to comment Share on other sites More sharing options...
sredish Posted May 8, 2004 Report Share Posted May 8, 2004 The mag shootouts are always bs and lopsided. Remember when the 400ex, they were so freaking ecstatic about the new honda. It's always the new kid on the block that get's the cheese. And you notice the banshee is NEVER in any shootout. Not too long ago they had a production quad shootout. Where was the banshee? They compared stock hp on the machines, the banshee would have wooped them, yfz included, then they compared the stockers with an aftmkt pipe, the banshee would've spanked them again. They only comparo that would have been tough on the banshee is the stocker mx. Don't get me started. Quote Link to comment Share on other sites More sharing options...
U8RSAND-Az Posted May 8, 2004 Report Share Posted May 8, 2004 You have to remeber two things. You can't believe everything you read and who's buing the advertising. The mags are not going to piss off the big spenders. On my fisrt shee I wanted to build it just like Duncan racing had done in one of those mag build ups. when I went to order it they said some of the things in the mag were just put in there for the advertisers sake and told me what to realy use. Buyer beware Quote Link to comment Share on other sites More sharing options...
BANSHEEK Posted May 8, 2004 Author Report Share Posted May 8, 2004 its the full yoshi,drilled holes in the box,never did anything to the needles,ran the air screws out like the kit said it ran like hell,soo i ran em back in,better but, it idles like hell too, as soon as u crank it up it hit ever lick as soon as it warms up just a little sounds like a dragster , maybe the needles sheek Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.