PolyKarbon Posted May 6, 2004 Report Share Posted May 6, 2004 Hey guys. I cleaned up my shee today and saw that my right carb is real loose. I can wiggle it back and forth pretty good. I dont think this is normal, so how do I fix it? I cant seem to find the screw or bolt or whatever. Please help. And on a funny side note, when I went to replace my plastics, I accidently trapped my ignition inside it. I didnt notice until I was done and tried to put the key in to start it and it wasnt there. Talk about embarassment. Could this be a new anti theft device? Quote Link to comment Share on other sites More sharing options...
sredish Posted May 6, 2004 Report Share Posted May 6, 2004 Hey guys. I cleaned up my shee today and saw that my right carb is real loose. I can wiggle it back and forth pretty good. I dont think this is normal, so how do I fix it? I cant seem to find the screw or bolt or whatever. Please help. If they're typical rubber boots, there should be a two clamps on each. On the intake/carb side, there should be one holding the rubber boot onto the intake and one holding the boot onto the carb. Same thing for the carb/airbox side, two there. If you can't see the screw that's on the clamp, it may be underneath or something, but it's there. It's a phillips head screw and I have a long screwdriver that i use to reach in there with. Later. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.